Post your BLACK 3rd Gens

Thanks boss!

 

1st day of ownership. Drove it straight to work from the Dealership. I also implemented a new rule at work - No one can park within 2 spaces of my beautiful truck, especially a stupid Dodge.

 

I would buy the package tomorrow but what I hear you have made the white portion that gives it depth. Excellent design.

 

One more question, are the tailgate logo stickers reflective?

 

Lake Pontchartrain in New Orleans.

 

The "TOYOTA" emblem I purchased from customgrills.com as well, cut off the piece holding the letters together and adhered them to the fabricated piece holding them all together.
I felt it looked a little more OEM and put together than just the emblem itself. Do it!! lol didn't really take much to cut out the letters.

Oh, and my tailgate letters? they're matte black not reflective.

 

Honestly the best grill I have seen on this forum. Thanks for the info.

 

Trans. 3/4 Qt. low, filled u joints, u bolts were OK, rear Diff was OK. Installed Access original tonneau cover.

 

rain is still washing all the salt off as you read

 

Just got the shell put on yesterday and I need to adjust/shorten the bars on the rack...it was pouring rain when the poor guys were finishing up the rack installation, and they had to do it outside because there was no room in the shop. I think I'll wait to do this in dry weather!

 

Thanks man! Appreciate it! Ill probably still swap it out if and when the PRO grilles become available. Best of luck with whatever you end up doing.

 

Anyone here debadge their black '16? I'm curious as to how they look.

 

I posted in another thread but figure I should include it here as well

added the following:
5100's all around with 0.85 setting in the front and Toytec 1/2" shims in the back
265/75/16 P-rated Falken wildpeak AT3W tires

 

I took everything off, a cleaner look in my opinion

 

What sliders are those ?
Thanks

 

Thanks for the response! This looks very clean, you even took the sticker off on the bed too. I like it!

 

They are Avid Off-road sliders.. Brandon does great work..

 

Finally got my step rails for the truck. Went off-roading on Bells mountain in GA. ended up breaking a front passenger CV axle. Din't do anything that difficult or hard core but when i got back onto pavement i heard a clicking sound coming from the front end and it turned out the axle was loose inside the boot on the transfer case side i could grab it and wiggle it around inside the boot. I took it into dealership this morning and so far Toyota is trying to deny the warranty work because I have a lift kit installed. my truck is less then 6 months old with 9,000 miles on it. So as of now I am waiting on the local Toyota rep to look at it an approve or disprove the warranty repair.i may need to get a lawyer if they deny it.

 

Than I would delete your post