What Have You Done To Your 3rd Gen Today?

If I could go back I would have gone this route as well - TRD OR w/ hood swap and painted fenders would be awesome.

 

Where at? I think on Amazon it's still like $106.

 

Please send me a PM. I will take care of you.

 

For those who have removed dealer pinstriping from their new trucks, what worked for you? I don't mind them that much, but in years to come know they will look like crap. Thanks

 

I got it last year on sale, I think this is the seller I got it from;

http://m.ebay.com/itm/Hi-Lift-Jacks...3D131398237720&_trksid=p2056116.c100408.m2460

 

Short term (6 weeks) tests show no signs of wear, but that is just me. Your mileage may vary.

I have charcoal metallic, which is very close to MGM.

 

I also replaced mine with LEDs recently and found it much easier to release the entire license plate light housing. Go under your bumper and look at the back of the housing (where you would normally try to get your hand in there to twist), and you will see there is a small latch on each side. I used a long, skinny screwdriver for some leverage and pushed on each side of it while pushing it out towards the license plate. Each side should "pop" and then the entire light housing while come out. Then just twist to release the bulb, switch it out, and then slide the housing back into place until you feel and hear a "click".
I hope this makes some sort of sense through text. Unfortunately I didn't take any pictures of the process. Hope you can get it handled! Cheers!

 

Sorry for the delay, I have been off the site for a little while. I have had these on for several months now with no problems at all. The windows open and close flawlessly with no hang ups.

 

http://www.autoanything.com/driving-accessories/60A5833A0A0.aspx

No this is the best sunshade on the market. I ordered one from AutoAnything last winter for my 2016. They had them listed for the new Tacoma's but I see now mine is probably a 2015 model sunshade. Still works as it should with about 1/2" gap on each side. Also with this sunshade the storage bag comes with it at no cost unlike Covercrafts UVS100 that charges you for it. I had one in my 2015 Colorado and it was a good sunshade only had 2" gap on each side for the sun to shine through.

 

Lift and tires?

 

Heated them up with a hair drier and once I got an end started they peeled right off. Waxed the panels after to seal them up.

 

Actually, I didn't think to ask if the bumper was plastic! My Tundra was steel and I owned many chrome/steel bumpers, never plastic! No big deal, I here it's cheaper to replace in sections though!

 

Don't they call that a "PRO"

 

Yeah which they did not make in the '16 model when I bought my truck

 

Just having fun!

 

Oh I know : )

Trust me I had a moment of cussing when I realized they were bringing it back for the '17 model (I got my truck in November before the rumors started). Oh well, it is what it is...

 

You and me both! but I am definitely happy with what I have.

 

I'm happy with what I have too, but I'm already picking out my next Tacoma.

 

Aren't we all?

 

Well, just dropped off my truck at Airaid for some test/tuning on their upcoming intake. Looks like they are pretty far along in the R&D process and just working out some final details.. Anyhow, if I had to guess, they should have intakes available in the next few months.