Clazzio leather seat covers!

Yep, they're here!

 

The sound track is a cross between a Shaman and a dutchman wear wooden shoes

 

Out of curiosity did your boxes say the same as mine even though it doesn't matter because mine are great

 

If you could post a pic when you get them that would be great since I just ordered the same color combo. I just ordered last week so I don't expect to see anything until the end of June at best. Mine are going in a Silver Sky Metallic, I thought they might look better then an all black interior.

 

I just found out that clazzio is in layton utah that's awesome! Only 15mins away from me

 

Should have mine tomorrow!! They're about 3 hrs away

 

Why does this seem so pooular? Seems everyone buyin it!
What am i missing here?

 

I don't mind, they're going in my first Japanese truck made in Texas.

The material is very nice, comparable to the leather Katskinz in my other car except these will go over the cloth and clipped in with velcro, the Katskinz replaced my cloth covers and I had to disassemble the seats and instead of hog rings used zip ties to make install easier.

Here's a comparision

Katskinz


Clazzio



Clazzios are about a third the price of Katskinz if you also include a shop doing install and 90% of the looks. They're also completely reversible unlike the Katskinz.

 

I thought so too since I'm in Salt Lake City but it is just their office and don't have any product there

 

I know I have no regrets. Just was surprised at the made in China thing. Don't like giving China my hard earned American bucks.

 

With the world economy the way it is and so many companies outsourcing today, it's hard to not find something with some Chinese parts installed anymore.

Something I've learned to accept.

 

You're missing that they are the shit obviously.

 

Got mine in today and was going to attempt the install but the instructions were hard to follow. Going to try again Sunday. The first step says to remove the plastic from the bottom of the drivers seat, what the hell is it I'm supposed to do?

 

Its pretty easy. There is an internal plastic "flap", the width of the seat by 4-5" high, that is at the rear of the seat near the floor. It is attached under the seat with a couple of little j hooks on elastic straps. It is similar to how cheap seat covers hook under the seat to the seat springs or frame. After you unhook them you will understand. I was a little bewildered at first too. You must be able to get your hands all the way through the area between the seat bottom and the seat back. Think of it this way. In a 2000 truck if you drop change it ends up in the rear floor. That cannot happen on newer cars mostly because of this flap. Once it is unhooked you do the bottom clazzio then the top. When you wrestle the back down to the floor you will hide the flap inside the clazzio. Had similar issue on wifes Escape covers.

 

yea, their instructions are pretty weak - kinda not acceptable IMO. One glance at them and they are clearly a Chinese company.... not knocking the product at all, but facts are facts. What they mean here (as I had to read it about 5 times and think about it as well)... STEP 1. ... Take off the rubber parts on the back side. What they mean is... on the factory seats, reach underneath from the back and unclip the two straps by pushing the aft hook part forward while holding the forward part stationary. If you get a mirror and flashlight and look under the seat you can actually see these two clips... they want you to undo the two factory seat clips. But dont worry this is not the only place you are going to be left going UHHH.

 

Did anyone know what to do with the ends of the string for the front seat cushion?? IT shows how to route the outboard string to the plastic on the side towards the rear seat... but they totally blow off how to route the inboard string.... does it go around the outboard or inboard part of the seat belt latch... and same for the wire on the seatbelt confirmation signal. Then how to bring the two strings together and tie them. Id rather then tell me so I dont find out by trial and error that I get wires caught or any number of interference problems. Its kinda sad they just totally blow off this detail.

 

How the hell are you guys getting confused? Lmao

I have to admit some of the words were poorly used but...... Look at the damn picture

It was pretty straight forward to me.

What's the level of education in here lol.

 

Also, for heated seats I dont think these fit very well... if you look at the factory heated seat wire (or whatever one that is) there no way to secure the velcro without stressing the living shit out of this wire. Does someone know the trick for this part... please see the photo... They expect you to fold up the piece to the right of the already stressed wire... there is no way I am going to do that. There must be an instruction missing regarding routing this cable or wire.

 

yea, I expected comments like that. go spend your time offering help instead of useless insults

 

BTW, what is your level of education here... and I bet your truck is not paid for.