BROSEFFF 2016 "LT BUILD"

Hes A busy guy and their business is blowing up! Very cool to see good people do well.

 

just noticed you removed your TRD decal. Looks pretty clean without. Might have to do the same.

 

I have a few questions about the front kit. How is the maintenance on the LT kit and does it drive much different on the road? If you were to start over would you do it again?

 

Yeah I've done this to all my trucks. The stickers aren't bad and decals aren't bad but within a couple years I get sick of the design and by that time it's generally too late as the paint has changed so much over the course of a couple years. A good compound wax and buff would probably fix the problem but I decided to do it earlier rather than later.

 

I love the long travel kit. That being said it does change things on-road a little bit. There isn't a sway bar anymore, although the coilovers do a good job at maintaining body roll and stability. I haven't run into any maintenance issues but the uniball design is stronger comma easier to change out than a regular ball joint, and I ran one on my Tundra for a hundred thousand miles plus without an issue. The polyurethane bushings on the other end of the arms are a way better design than the stock. They are noisier than stock but that's because they're harder and have a longer service life because so.

 

Very nice build man! Can't wait to see what else you have coming up next!

 

Great thank you man! And one last question did this bring you any warranty issues?

 

Sure...on suspension stuff. If my motor broke or a window wouldn't go up than it would be covered.

 

I'm planning to do the same. Also why I'm going with the rock blokz mud flaps. Not sure how it would work with the off roading you do though.

 

Sweet truck! Stickers will be the first thing to go on mine. Where did you get the grill dipped? That'll be the second thing on my list...

Nevermind, just figured it out

 

What did you use for the flashlight mount? Great buildcant wait for future stuff

 

On Amazon...quickfist mount

 

what spring rate are you running up front? how is it with the bumper? thinking of going back down to a 650 or even 600lb 14".

 

600lbs

 

Was there a recommended wheel backspace/offset for your kit? I've been searching for the answer and no luck

 

Why hello there

 

Dual batteries in...

 

Pelfreybilt video shoot with the one and only Defconbrix. Good times and good people!...and coldies.

 

I just stumbled across your build...those lower control arms are pure sex.

Great job on the whole truck.

RJM

 

Thanks man