What Have You Done To Your 2nd Gen Tacoma Today?

Thanks guys! I'm planning on converting to all white LED's so perhaps I'll just dim those with a resistor.

 

I have white switches if you want to check them out and see how bright they are. When I get them wired in, anyway.

 

pressed out some cracked bushings and gave her a quick rinse.

 

D

Dog hammock in the back?

 

New, Longer, stainless steel brake lines. I had to replace the hard line to the caliper on the passenger's side as well. The eagle eyed here will notice the front end is missing something too....






Ran some Power to the bed too. For the record, the dust from drilling in the composite bed is BRUTAL if you get it on you.

 

Hell yea man, that would be great. I would offer to do a mutual switch wiring day, but something tells me you're gonna have yours in well before I get to mine.

 

Clazzio covers are pretty reasonably priced.
https://www.clazzio.com/toyota-tacoma-faq.php

 

Nice. What brand?

 

Installed yellow fog lights and Diode Dynamics LED yellow fog light bulbs. Adjusted them so they weren't blinding oncoming traffic.

 

Bought 2 of these pods off a friends for $5 just need to wire them up now

 

Took it in the sand for the first time. #PreRunnerProblems

 

Sexy. Period.

 

You still have any of them bilstein stickers left? Haha

 

Slick! Did you make a tutorial for that?

 

No tutorial really necessary...

Hold the bezel where you want it, pre-drill the four screw holes and then screw it down.
Next use your hole saw, and get the center hole started for each of the three pods.
Remove the bezel, and drill the three holes for the pods. (avoid getting the composite bed dust on your skin, it's got glass in it, and will burn like fire ant bites.)
install bezel, install wires on the pods, drop the pods through the hole, and screw them done.

Finally, run 12v to the bed of the truck.

http://www.amazon.com/Astra-Depot-F...&redirect=true&ref_=oh_aui_detailpage_o02_s00

 

Spotted another Prerunner 4x4 today. I covered your license plate for you but you know who you are;

 

New wheels and tires (not all of the red inserts put on yet lol

 

Thanks.

Where did you end up running the 12v wire into the bed?

 

Pre runner or 4wd?

 

Got the tranny, flywheel, front diff off. Found out the bearings are shot up front, and there is a coolant leak from right under the water pump...