1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Front Brake Pads Knocking

Discussion in '2nd Gen. Tacomas (2005-2015)' started by mjpatera, Apr 10, 2016.

  1. Apr 10, 2016 at 7:36 AM
    #1
    mjpatera

    mjpatera [OP] Member

    Joined:
    Feb 14, 2016
    Member:
    #178187
    Messages:
    7
    Gender:
    Male
    First Name:
    Mark
    Vehicle:
    2013 Tacoma SR5 V6 4x4
    I have a 2013 4x4 Tacoma. I've got an issue with the front brake pads on the passenger side shifting back and forth inside the caliper making a loud knocking noise when I apply the brakes. It only does the first time I hit the brake when going from forward or reverse. I've pulled the wheel and pads off and don't see any noticeable wear in the side of the pad or the caliper. without the springs in place it seems to have the same amount of free play as the other side but the passenger side pads are the only ones making the noise.

    Anybody seen similar issue or any ideas to fix it?
     
  2. Apr 10, 2016 at 8:00 AM
    #2
    jmaack

    jmaack Well-Known Member

    Joined:
    Jun 9, 2014
    Member:
    #131634
    Messages:
    4,894
    Gender:
    Male
    First Name:
    Justin
    Helena Alabama
    Vehicle:
    Skewped hood silver 4runner
    Ome, Sqeak free dakars, arms, skids, sliders.
    Floating pads. Not much can be done.
     
    TheCookieMonster likes this.
  3. Apr 10, 2016 at 9:39 AM
    #3
    landphil

    landphil Fish are FOOD, not friends!

    Joined:
    Mar 3, 2011
    Member:
    #52290
    Messages:
    3,202
    Gender:
    Male
    BC, Canada
    Vehicle:
    RIP 2006 Tacoma DCSB
    Tundra 5.7 mod
    Mine always had the issue - until I replaced my front rotors, pads, and rebuilt my calipers last fall. (each one had a seized piston, no sign of it until I went to push the pistons back) I also installed a second set of rattle springs - one on top, one on the bottom, have not had the "clank" since then. Used OEM pads. Not sure if the stuck caliper pistons was the main issue, or the second rattle springs, but either way, it's silent now.
     
  4. Apr 12, 2016 at 7:43 AM
    #4
    HB Taco

    HB Taco Well-Known Member

    Joined:
    Apr 10, 2011
    Member:
    #54683
    Messages:
    1,241
    Gender:
    Male
    First Name:
    Curt
    Huntington Beach, CA
    Vehicle:
    2019 F150 FX4 S Crew 3.5 TT
    I've had this issue for years. Seems retarded that they only put one retainer spring on each side when it clearly should have two. I'm getting ready to do my brakes soon. Also a small amount of grease on the pins should help. Will report back after I've done them.
     
  5. Apr 12, 2016 at 7:47 AM
    #5
    CBiscuit14

    CBiscuit14 Professional Lurker

    Joined:
    Jul 9, 2013
    Member:
    #107912
    Messages:
    280
    Gender:
    Male
    South Dakota
    Vehicle:
    08 DC TRD Sport 4X4
    It drives me crazy. Makes the truck sound like a cheap can of loose bolts. And it never fails, it's the loudest when somebody is checking out your ride.
     
    Sweetleu417 likes this.
  6. Apr 12, 2017 at 6:47 PM
    #6
    Sweetleu417

    Sweetleu417 Member

    Joined:
    Apr 5, 2017
    Member:
    #215476
    Messages:
    20
    Gender:
    Male
    Vehicle:
    2019 TRD OFF ROAD 6speed manual
    Mine makes the same noise. Only when I initially apply the brakes to slow down or stop. I will be checking my front brakes this weekend. Maybe the pins are worn allowing more movement??
     
  7. Apr 12, 2017 at 6:56 PM
    #7
    Lord Helmet

    Lord Helmet Prepare To Attack

    Joined:
    Aug 30, 2012
    Member:
    #85875
    Messages:
    39,167
    Gender:
    Male
    First Name:
    Nick
    Vehicle:
    '24 X3 M40i
    x2 This....

    Pretty common on floating pads type of brake system. Same thing happens in my brother in law 06' STi.
     
  8. Apr 12, 2017 at 7:02 PM
    #8
    Blackshirts

    Blackshirts Well-Known Member

    Joined:
    Feb 24, 2010
    Member:
    #32057
    Messages:
    4,368
    Gender:
    Male
    First Name:
    Mike
    TX
    Vehicle:
    09 PreRunner-Totaled. 2016 SR5 Blue DC
    Stuff
    Check to see how much pad life you have left. Usually when you start to hear noise they are wearing down and the caliper has to extend farther to push the pad against the rotor.
     
  9. Apr 12, 2017 at 9:46 PM
    #9
    magnetic4x4

    magnetic4x4 Well-Known Member

    Joined:
    May 23, 2016
    Member:
    #187721
    Messages:
    125
    Gender:
    Male
    Vehicle:
    2013 Magnetic Gray DCSB XSP-X 4x4
    My truck does the same thing and it only has 41k miles with about 6mm of pad left.
     
  10. Apr 13, 2017 at 4:18 AM
    #10
    ABNFDC

    ABNFDC Well-Known Member

    Joined:
    Aug 29, 2016
    Member:
    #195902
    Messages:
    978
    Gender:
    Male
    Granite State
    Vehicle:
    2008 4WD Access Cab TRD OR "Rugged Trail"
    265/75/16 Wildpeaks, Dakar rear, HS 2.5" front coils
    Mine has been off and on clicking without the brake applied at low speed. As soon as I apply the brakes, it goes away. Brakes(pads, rotors, & hardware) and wheel bearings are less than a year old. I had it on jackstands about a month ago to flush the power steering and the wheel bearings were smooth as ever.

    I'm going to put in an extra anti rattle spring on each side this weekend to see if that's it. Figure I'll try cheap fix before suspecting something like the CV joint.
     
  11. Apr 13, 2017 at 6:37 AM
    #11
    justdoit

    justdoit Well-Known Member

    Joined:
    Nov 28, 2015
    Member:
    #170886
    Messages:
    687
    Gender:
    Male
    Colorado Springs
    Vehicle:
    22' 4x4 AC TRD Off-Road
    Same here normal clicking sound.
     
  12. Apr 13, 2017 at 10:02 AM
    #12
    knottyrope

    knottyrope Well-Known Member

    Joined:
    Apr 13, 2017
    Member:
    #216122
    Messages:
    2,277
    Gender:
    Female
    First Name:
    Knotty
    Bahstun
    Vehicle:
    09 Taco CCLB 4x4 SR5 4.0
    Pads, rotors, ujoints, 5900K Super White Xenon HID Halogen Bulb Fog Light
    mine did it till I replaced the pads at 100k

    my 99 taco had a weird noise going over bumps, after doing brakes a second time years later I found a socket in the caliper piston that was left there from compressing it. LOL
     
    Sweetleu417 likes this.
  13. Apr 13, 2017 at 1:59 PM
    #13
    justdoit

    justdoit Well-Known Member

    Joined:
    Nov 28, 2015
    Member:
    #170886
    Messages:
    687
    Gender:
    Male
    Colorado Springs
    Vehicle:
    22' 4x4 AC TRD Off-Road
    Wow lol
     
  14. Apr 13, 2017 at 2:30 PM
    #14
    nd4spdbh

    nd4spdbh Well-Known Member

    Joined:
    Oct 7, 2013
    Member:
    #114055
    Messages:
    14,579
    Gender:
    Male
    SoCal
    Vehicle:
    13 DCSB TRD OR v6 Auto
    yup just happens with the floating in the caliper pads. I even added a second set o springs, but there is no getting around the pad shift. I can make it do it on command between backing out of my spot at work and the first stop i have to do.

    No harm is done and the truck stops like a beast so i dont have any worries.
     
  15. Apr 13, 2017 at 2:41 PM
    #15
    Capt. Obvious

    Capt. Obvious Fearless Keyboard Warrior

    Joined:
    Aug 4, 2014
    Member:
    #135396
    Messages:
    1,637
    Gender:
    Male
    First Name:
    Darrick
    Gig Harbor
    Vehicle:
    '12 DCLB TRD
    6" body lift, LEDs errwhere, Jesus mural on the hood
    This will be the best $4 you ever spend on your truck.

    [​IMG]

    Take a wheel off, pop the pads out, wipe the pads off, goop some of this on the areas where the pistons touch, reinstall pads and wheels. Repeat on the other side. It takes under an hour.
     
    Sweetleu417 likes this.
  16. Apr 15, 2017 at 1:45 PM
    #16
    Sweetleu417

    Sweetleu417 Member

    Joined:
    Apr 5, 2017
    Member:
    #215476
    Messages:
    20
    Gender:
    Male
    Vehicle:
    2019 TRD OFF ROAD 6speed manual
    I fixed mine this weekend. The front brakes were making the clanking noise. Pulled the oem Toyota pads out took both shims off the pad and used brake cleaner and a 3m scotch pad on the shims to get them nice and clean. Then I cleaned the brake pads because there was pleanty of life left on them went to autozone and bought 4 new pins because the ones in there were crusty. Applied brake grease to back side of shims and anywhere it slides on the caliper. Put it all together and no more brake clanking!! my guess is that in between the shims were dirty and the pins were crusty
     
    fla_sun likes this.
  17. May 5, 2017 at 9:34 PM
    #17
    WATaco

    WATaco Well-Known Member

    Joined:
    Jan 26, 2015
    Member:
    #147290
    Messages:
    336
    Gender:
    Male
    First Name:
    Ed
    Seattle-ish, WA
    Vehicle:
    '14 Tacoma ORD
    Leer, AllPro sliders, Prinsu, OME, JBA UCA
    good info, I think I've got the same thing going on. gives me something to look for as I prep for summer.
     

Products Discussed in

To Top