What color are the wires for the rear turn signals at the tail lights?

I have a 2013 TRD Sport V6 AWD and trying to figure out if I have the correct wires I need to splice into.

 

For the 2012 the Left is Yellow and the Right is Lavender with a White stripe. I suspect the 2013 is the same...

 

Do you have the V6? Not sure if that matters. Thanks!

 

Doesn't matter.

 

Ok when i get a chance ill look for those colors. Thanks jimmy!

 

Jimmys to the rescue lol

 

Green and yellow for both sides

 

Thats the ones i had tapped in to, I knew I wasnt going crazy! Thanks again GYM!

 

I hate when the prints are wrong. It seems they are incorrect more than they are correct on the wire colors.

Sorry for the bad information.
This is from the 2012 Electrical Schematics:

 

Yeah thats not even close! Do you have the rest of the schematic?

 

I would like to know also. I want the whole schematic, mainly front dtrl if possible

 

Yes.

 

Could you post it please?

 

OP, just look at the colour of the wires that go to the indicator bulb.

 

I have aftermarket tail lights so the harness was switched around. I figured it out though, its green with a yellow stripe, gym confirmed it for me.

 

That has to be for an earlier model tacoma or diff toyota model. I can that if guarantee that if you pulled your tail lights off a 2012 Tacoma that it won't be those colors

 

Those are the prints from the Toyota Technical Information System ( TIS ) for a 2012 Tacoma... Right or wrong that is the source.

:Shrugg:

 

I just looked up the 2006 Model and it shows the wires as Lavender / Black Stripe for Left and a Lavender / Yellow Stripe for Right...

Either way good that you found them.

 

I wish my all data went higjer than 2010 models! Oh well i appreciate the help though!