The ToyTec BOSS Lift Thread

Also how were the alignment numbers afterwards?

 

I had a shop install it, took about 4 hours. Seems pretty basic but i don't really have all the tools or a place to do it otherwise i would have tried to do it myself. I can take more pics, what do you want to see? any certain angles?

 

Have alot of caster, but not sure if thats a super bad thing. truck drives fine. Taking it to a proper alignment shop on thursday to see how close to spec they can get it.
https://www.tacomaworld.com/threads...-by-toytec-lifts.395798/page-96#post-12175436

 

Maybe the front, back and at an angel? I'm just trying to compare it to what I have already and since we have the same size tires I want to see if it looks weird not running 285's like most people. I'm curious about what they tell you about the alignment afterwards, personally I think the LR UCA's might be a good choice since you can adjust your own caster before they take it in and dial the rest in. I didn't think that the Total Chaos UCA's would give our truck that much caster. I see people on here trying to get enough just to be in spec.

 

How much did it cost you to install and kit?

 

How many inches are you guys gaining ?

 

$500 for the kit and the TC UCAs

 

Im at 23" hub to fender, so thats 2" above stock. ToyTec says 23" is the magic number and to not go higher. The rear is about 24" after adding the 2" AAL

 

I would like 3" of lift

 

So 3" above stock? That would be a 4" lift

 

You have new UCAs?

 

No need for them 2 inch in front and 1.5 AAL in rear that gave me level and 3 inch because of the 1 inch higher over the 2ed gen I like the look and the ride is just a bit stiffer but not harsh

 

What tires and size?

 

BFG KO2 - 285/70 R17

Require minor trimming with the 3" lift

 

Loss in power?

 

None

 

I'm considering the Boss kit over Icon.

 

I am also looking at the Toytec ultimate kit over the others. would like to wait and see if Toytec adds oil reseviors to the ultimate front coilovers.