FN FX Pro wheels

@13txtaco you'll need to call Dustin @ FN for pricing and availability.

Here's the specs:

FN Wheels ƒ(x) Pro
Diameter: 17"
Width: 8"
Offset: 0mm
Backspacing: 4.5"
Load rating: 955KG (2,100lbs+)
Weight: 24lbs (approximate) (vs. 27lbs + for the OE wheel)
Certification: JWL-T, VIA, SAE J-2530, DOT approved
Colors: Matte gunmetal, dark gloss gunmetal, matte black and matte bronze
Toyota specifics: 106mm hub centric for Toyota hubs, lug holes drilled for 12mm Toyota wheel studs for a snug fit, and center machined to accept flat snap-in OE center cap* (not the raised OE Pro cap).

 

FN Wheels ƒ(x) Pro
Diameter: 17"
Width: 8"
Offset: 0mm
Backspacing: 4.5"
Load rating: 955KG (2,100lbs+)
Weight: 23.88lbs (approximate)
Certification: JWL-T, VIA, SAE J-2530, DOT approved
Colors: Matte gunmetal, dark gloss gunmetal, matte black and matte bronze
Toyota specifics: 106mm hub centric for Toyota hubs, lug holes drilled for 12mm Toyota wheel studs for a snug fit on all 6x139.7 Toyota hubs.

 

Thanks for the details.

 

Is that factory suspension? No lifts?

And wow be frank with 0 shame i wanna say that I just may copy the flag look! Where did ya buy it?

More pics of the truck pretty pls!

 

Suspension is Fox 2.5 front coilovers(about ~3" total lift)
Rears are Fox 2.0 with 3Leaf progressive (added ~1.5")




Subdued flag I got here; http://www.ebay.com/itm/Subdued-Ame...ash=item464c34a000:g:8n8AAOSwZd1Vap6l&vxp=mtr

 

I ordered my wheels last night. Now I'm wondering if I should have ordered a fifth for a spare. My thinking is they use a different lug nut and if I didn't it might cause a problem if someone down the line if someone tries to use the FN FX lug nuts on my factory spare.
Any opinions?

Will this wheel fit in the spot for the spare tire?

 

it should fit under the truck no problem, you can also carry 6 lugnuts for the factory wheel....your call.

 

Be cheaper to just throw six lugs in a plastic bag and keep them next to the jack or in the glove box so you can use with spare.

 

Hey I have done some searching and I was curious what the part number is for the Silver TRD Pro Center Caps? I want to make sure I am ordering the right size to fit the FN Pro 17x8 Wheels!
Not sure if it is: PTR18-35092 or PTR45-34071?

 

^ Mine were PTR18-35092

 

Perfect, thanks!

 

I have a question about lug nuts on these wheels. I was fairly certain Dustin mentioned the stock Tacoma lug nuts won't work with these wheels but I see people using stock ones. Which is it? I ordered black but now I kind of like the chrome nuts with the TRD center a little better. Can I use the stock nuts?

 

To my knowledge they have to be spline lug nuts to work due to the dimensions of the wheel where the lugs are inserted. You can order a set of chrome spline nuts through Dustin instead of the black!

 

Anyone have a photo of these on an '16 Inferno TD Sport?

 

check out this post
https://www.tacomaworld.com/threads/show-off-your-fn-wheels-fx-pro-and-specs.414804/#post-12222886

 

Could anyone advise if these look like legit FN FX Pro wheels? Looking at internet 2nd hand purchase and there are just a couple red-flags. Main one is the center caps look OEM raise which according to Dustin's description should not fit. Also the box does not look quite right...?

 

I just got a set from Dustin a week or so ago and are currently waiting to be installed. I snapped a picture of the box and wheel itself. Like you said the wheels from Dustin don't have a raised center cap and the box looks different as well on mine.

 

Thanks for the quick response.
Maybe these are a knock off of the FN FXs?

 

These look like the one I got last week also, those others @Damage Inc posted look like fake FN FX Pro, TRD Pro wannabes.