What Have You Done To Your 3rd Gen Today?

There is a setting in the preferences that you might have to switch. I think the default is for Bluetooth. I had to go to the Carista site to get the info. I think it's like in the trouble shooting section.

Also just looked on the app. There is a connection help in the setting/preference thing upper left of the opening app

 

@breader3 has done his on an aftermarket. I did them on my stock grille.

"I purchased 3 LED Flush Mount Bolts from Oznium (the 11mm ones) without the lens, and in amber (obviously), measured the center, found how far apart I wanted them, and drilled. They mount up very nicely, and come with two nuts each (which I thread locked). "

 

All stock. No issues. Wanted just a little more up front

 

$56 Plush Paws Products Premium Rear Car Seat Protector w/Hammock | Washable & Waterproof Back Seat Dog Cover for Car, Truck, & SUV | Nonslip, Tear Resistant Pet Seat Cover | Regular Grey

http://www.amazon.com/Pet-Seat-Cove...&redirect=true&ref_=oh_aui_detailpage_o00_s01

$25 K&H Pet Products Car Door Protector for Dogs, 2 Pack Waterproof Interior Pet Car Door Protector from Dog Scratching, Stay Put Cover Design, Fits Most Vehicles, Washable - 27 x 19in Gray

http://www.amazon.com/Manufacturing...&redirect=true&ref_=oh_aui_detailpage_o00_s01
Get the door covers. I did quite a bit of research to find ones that everybody wasn`t bitching about. These stay in and don`t scratch the tint. I have been using the cover and the door guards for the last month and they are both great. 2 minutes in or out once you get them set to your liking

 

Did you do any lift in the rear? Stock? Having 5100 put on all around on Friday. Have sumo springs in the rear raised me up 5/8". Was thinking of doing the .85 in the front. Looking for more level than a reverse rake. Recommendations?

That question goes out to all of you that have the 5100 set to .85. And yes I am aware of the other threads about this but more people look at this thread. If you had to do it over would you set them to 1.75? With no lift in the rear? I know they settle out. I want an even level truck.

 

If you pay for shipping

 

How's about a side pic of your ride, looks good with RWL on the outside and OR wheels, tks

 

IF you do. I'd suggest taking them somewhere and having them actually Rhino lined or line X'd which is what i'm probably going to do. Right now they're just painted with an enamel based paint right now from what it looks like and I had to touch them up from dinging them up on the trip back from the trade.

 

Nothing to the rear. I wanted just a hair reverse rake and like you said it should settle a little to near level. I was afraid the .85 would droop after awhile. I dig it. Unfortunately my wife noticed it and then realized I put new rims and tires on also. Been getting away with it for 2 weeks without her noticing.

 

You going to vinyl cover the world? Dis I gots to see!

 

Following YDCtaco's lead, I bought a single 18"X27" ribbed mat from Home Depot and made covers for the storage bins under the jump seats of my 16' (access cab).
I live in Ga. and summer heat doesn't treat glues very kindly & I thought about what the bin lids would look like in a couple of years if the Velcro glue went bad. I've had the industrial stuff on a motorcycle before and it made dried duct tape glue look happy in comparison. So, I took my $3 mat and secured it with $10 worth of snap fasteners. The rug side is held in place by riveting it through a hole made with a hammer & punch. I gently melted the pile around the holes with a butane lighter to aid in installing the snaps. I measured and figured out where the screw-in snap bases went and then held my breath as I hand drilled eight holes in my new truck! LOL
I ended up using the punched out holes as a guide to mark the drilling spots using a silver Sharpie pen. It all went pretty straightforward with no surprises.
It turned out okay, except for the silver snaps. At first, I thought about painting them with bed liner spray. However, a quick search of my previous m/c project leftovers produced a strip of 3D carbon fiber wrap material. I cut out 8 discs, stuck them to the snaps and then formed them in place with a hair dryer. If they get boogered up, I can always make more. The flash made them stand out more than they actually do. From 10 feet away, they are hard to see, actually!

 

Awesome thanks!!!

 

That looks awesome! Glad I could help haha

 

YOU started it! LOL

 

This looks familiar, are you in Birmingham ? (Yea, I know lots of construction looks alike...)

 

Added hood struts

 

New Grill & Bug Deflector! Aloha

 

Having fun with the mods!

 

Got a great deal for a bed mat for my longbed for $115 Canadian this morning