What Have You Done To Your 3rd Gen Today?

Nice! Exactly what I did, but I used vinyl to see if I liked the result. Will probably paint for a permanent solution once I find some time, which could be never - bloody kids and their sports.

 

Looks great... I would consider painting the fog light surround and the black inset between the bumper and the grill also... There is another 16 Tacoma here on TW's White Tacoma thread with the area painted and it looks absolutely beautiful... I don't have the white, but that's what I would seriously consider doing.

 

This is the one I bought for my truck to use with Carista. Works great. $13 bucks. You need the BT model, NOT wifi.

$14 Panlong OBD2 Scanner Bluetooth OBDII Diagnostic Tool Car Code Reader Turn Off Check Engine Light Support Android Torque App

http://www.amazon.com/Panlong-Bluet...&redirect=true&ref_=oh_aui_detailpage_o09_s00

 

Hang in there buddy, It will all work out! Look at it this way, maybe she will get a better job and that will give you a reason to buy the

2017

 

Bought the same one. Seems to work great! Using Carista as well as Torque.

 

(biting tongue)

 

Got a bath and dog box for the bed

 

What size tires do you have?

 

What wheels are these?

 

Well, I know I can't afford the Off-Road package or 4x4, but I also know I use my truck like a truck and it's gonna get dirty.
My compromise? Step sleeves!
I mounted mine slightly forward of center based on where my stubby legged family enters the vehicle.

 

You didn't say for the dog tho....you got kids? That's cruel, man!

 

I agree with all but there are many times when I can not take the gun into the place I am at such as a casino , some churches ,
schools ,gun shows etc. I have a concealed carry , and there are also the brandishing laws to worry about .
A tip to meet up with someone to buy or sell something is to have them meet you in the local police department parking lot or some such place . You can let the police know ahead of time . If the buyer/seller says no , forget the deal . My 2 cents .

 

A mount like this serves it purpose. I shoot both left and right handed with rifles and pistols, this would be quite handy for those long road trips when you want to take your gun off your belt. If I am going to be driving an hour plus somewhere I will take my gun off and put it in the cup holder or center console and then put it back on before I leave the truck. This would be helpful if you were say in a drive through and had your gun off, but instead in this holster, it would still be accessible and not visible unless you open the door. BUT I do conceal carry and believe that even "printing" is bad, to many guy sees gun owner guy takes gun and shoots owner videos, so yes leaving your firearm in this holster while exiting the vehicle or leaving it unattended isn't the best option out there.

 

I like this ALOT my fav gun setup I've seen so far. Nice work!

 

Blisteins installs all four corners, fronts .85. Sumos on in the rear 5/8". Very slight reverse rake only if you strain to look. Once the fronts settle a bit it will be perfect for what I wanted. Going for a test drive in a bit. But felt good driving home from the shop. Shout out to Sean and the guys at the Washington street Sulluvan Tire store in Weymouth. Always treat me good for a fair price. Works when the techs love your truck.

Before after
Front air dam comes of next week when the new front skid arrives. Custom leather seats installed first part of May. DONE!!

 

Almost at 1k miles. Everything is working beautifully and my MPG keep increasing (~21mgp currently). The dealer topped of my tranny fluid the day I picked it up (slightly <1qt low). I greased all of the U-joints (they all needed it) and torqued the U-bolts (none of them needed it). I've heard the howl from the LCAs, but it hasn't been loud enough to bother me and only happens on occasion. No cracks/chips in the windshield, as of yet.

Just tried out that Meguair's Ultimate Liquid wax. Worked well.

Modifications:

- Debadged
- Weathertec mats (black)
- LED interior + license plates (will do headlights later)
- Philips LED reverse lights
- Added factory door sill protectors
- Black Plastidipped grilled w/Gloss overcoat (I like the orange peel texture!)
- Blacked out the tail pipe with high-heat black paint (screw $60 for a tip)
- Center console organizer
- Carista OBDII dongle
* 7 blinks for turn signal now
* Turned off seat belt beeper
* Some other little system changes I don't recall at the moment







Overall, NOTHING TO BITCH ABOUT.

 

Installed a MAgnaflow exhaust today...

 

Currently doing mine. I did many coats of black and three clear

 

So should I just ask my dealer, "hey I hear the atf is usually low, can you check it out?" And the units also? Just don't want them laughing at me

 

I was really pumped about adding this LED light Bar and i think it came out awesome, i had to pre-measure and cut under the grill to fit the light bar, brackets were a hassle to put on, but glad those brackets are mounted on the lower front of the frame for tightness. what ya'll think? 50 inch curve LED is next.