Clutch problem!!

So I have this weird problem with my clutch I've ask so many people. So I have like half a inch of play in my clutch. I put a brand new master and slave in it. I half to put my foot under it every time I change gears, because when I don't it's hard to put it in first. Almost impossible to put it in reverse.

 

Cant you adjust the rod in your video . Making it tighter should take the clearance out of the pedal .
Are you sure you got all the air out of the system ?
Those master cylinders need to be bench bled

 

I've bled it a lot but it hasn't helped. And I've adjusted the rod. If I can't go much father. Also I was told maybe the pen that's holding it in could be screwed up.

 

Is the pedal not coming all the way up when you take your foot off? Maybe a spring is broken?

 

Yeah when I let go it comes up but I need to push it the rest of the way. The spring looks like it's in One piece. On my lunch I'll run down and take a closer look. Thanks for the tip

 

Now check it out! I don't get it. I've never seen a problem like this. I can still change gears okay but I really want to know what's going on.

 

Something stop pedal moving, you grease it

 

Where should I grease it? I'm not a clutch person hahah

 

Where moving part that you can see it

 

i believe your return spring is broken or has fallen off.

 

I had my girlfriends dad take a look he says its bent. Would it be okay to maybe take the spring out then bed it back to place a little. (If possible?)

 

no need. there are spring mods that are better. the OE spring is squeaky. mods are quieter and do the same job. search for it.

 

Got a idea of a mod that I can search?

 

http://www.yotatech.com/f2/fixed-stupid-plastic-clutch-pedal-bushing-19137/