What floor jack, stand, & creeper are you all using?

What do you recommend for below?

1) Floor jack
2) Jack stands
3) Creeper
4) Ramps
5) Wheel chocks

Thank you!

 

Been happy with craftsman jack....... and some huge ac delco 6 ton stands. Mine are as tall LOWERED as my other stands were extended.... a must for holding by the frame with even a minor lift.

 

I bought a bottle jack for the trail, I never bothered buying a proper roller jack for home, but I use hoists at work when I'm doing anything big. I chalk using wood.

Bottle jacks and some large pieces of wood work great on the trail when you can't use a hi lift.

You won't need a creeper on a 3rd gen for a long time. Just a jack and jackstands are all you should need on a brand new truck.

 

For jack stands and jack, pay attention to the maximum height. I'm always trying to get as high as possible. I've pushed the limits a little by using a block of wood between the jack and truck and using a piece or two of 2X10 lumber under the jack stands but you're better off getting a set up that will get you where you want to be without modification.

My 6 ton jack stands go up to about 24" and I'm considering some 12 tons that go up to 30".

I recently bought this creeper:

$243 USA Made - Professional 44" Either End Adjustable Creeper (MTL2UP) - by Whiteside Manufacturing

http://www.amazon.com/USA-Made-Prof...53125821&sr=8-17-spons&keywords=creeper&psc=1

It's very nice to be able to adjust it to a semi sitting position. I haven't had it long enough to know how it will hold up.

 

Napa 3.5 ton jack
AC Delco jack stands (set of 4 ton and set of 6 ton -- overkill on capacity but they have 21" and 24" height respectively)
I use cardboard as a creeper (no wheels or pads)
I use Rhino ramps for oil changes
I use old work boots for chocks

 

This works for me.

$62 Powerbuilt 2 Ton UniJack Combination Hydraulic Bottle Jack / Jackstand in 1 Unit, Compact, Portable, Wide Base, for Unibody Sedans, CUVs, SUVs, Cars, - 620470

http://www.amazon.com/gp/product/B0... powerbuilt&qid=1444181794&ref_=sr_1_1&sr=8-1

 

Very interesting solution.

 

I just bought this creeper today at Harbor Freight. On sale $19.99 mon thru wed this week (with coupon from flyer)

 

I used this same one this weekend to grease the front drive shaft. I was just thinking I'd like to pick one up, too!

 

Price is low but so are the reviews

 

It's harbor freight stuff. The other half of the "average joe" in there is likely a mouth breather who'll post shitty reviews on cheap products complaining they're cheap.

 

I'm sure the mouth-breathers think it is a piece of shit because it doesn't roll smoothly across the gravel parking lot in the trailer court. I brought it home today, bolted on the wheels and slid under the truck just to see what kind of clearance I would have. It worked fine, it held my ass off the ground and rolled under the truck. Good enough for a home mechanic that will use it 2-3 times a year.

 

- 3 ton Duralast hydraulic roller jack.
- Craftsman creeper
- Craftsman 4 ton professional jack stands

All of them have held up well with several years of use.

RJM

 

- Never skimp on items that your life may depend on.

RJM

 

I've found that when people take the time to leave positive reviews the item is typically of great value. I usually avoid low rated products because I've had best luck with highly rated ones.

 

I have a low profile jack and Delco stands as well as this guy. Use them for the Roadsters, Tacoma sees the dealer for everything and the Car wash for everything else. http://www.calcarcover.com/product/231/31/Low_Profile_Billet_Aluminum_Jack for the MX 5

 

$100 aluminum steel hybrid 2.5 ton jack from Costco.

4x4s for Jack stands. Also HF stands.

Older non stackable Rhino ramps for ramping. (They hold a 4x4 2500HD GM no problem)

Craftsman molded plastic creeper. Very nice.

Rocks or 2x4s for chocks.

 

If my life is depending on a creeper under my truck, I've given up all hope at that point. It's not a rocket sled, it keeps me out of any junk on the ground and makes getting under/out from under easier.

 

Lots of good discussion but got a more basic simple question on the 16's; anyone know what the proper location for jacking the front and rear ends are and where the jackstands should be placed on each end. I know there are recommended locations rather than just trial and error. I have heard that newer vehicle differentials are no longer reasonable to use to jack the vehicle. Have a 2016 TRD Offroad 4x4 Doublecab 5 Foot bed.

Thanks.