Custom Emblems

Hey TW!

Give your Tacoma the look it deserves with a custom emblem.
CNC machined out of 6061 T6 Aluminum.
Emblems can be mounted on the front grille or rear hitch

Emblems are available at Diazfabrication.com
I can be reached by email at: andres@diazfabrication.com
PM me and ask for coupon code available for TW members only = ]

-Andres

TRD emblem






As we all know, TRD stands for Toyota Racing Development and it was established as a line of higher performance vehicles and parts in the line of Toyota, Lexus and Scion vehicles which range from commercial to professional racing series.TRD is responsible for improving the performance of commercial vehicles as well as supporting Toyota's racing campaign around the world.


TEQ emblem:




TEQ emblem was inspired by the famous original Toyota logo written in Katakana, a type of japanese writing. in 1933 Kiichiro Toyoda founded Toyoda Motor Co. which started as a side project inside Toyoda Automatic Loom Works. With the success of it's first production vehicle (model AA) Toyoda Motor Company sets off to become a japanese car manufacturer with hopes to be at the level of American and European car makers.

In September 1936 Toyoda Motor company ran a public competition to design a new logo for the company, the end result was a modified version of japanese writing spelling the word Toyota substituting "da" for "ta" for a few reasons:

1) Toyoda (トヨダ) was changed to Toyota (トヨタ) because it took eight brush strokes instead of ten.
2) Toyota (トヨタ) can be written by using 8 brush strokes, lucky number in Japanese culture.
3) Toyota has a much clear sound than Toyoda

Both of these emblems can be installed on the front grille of Toyota vehicles with the use of a mid bracket. It can also be used as a hitch cover with a hitch bracket or as a stand alone emblem in an after market grille, double sided tape or even hang it on your office wall.


TRD shown with mid bracket for installation on factory Toyota grilles.
Mid bracket sold separately


TRD shown with hitch bracket for use as a hitch cover.
Hitch bracket sold separately.


Feeler:
I couldn't resist and get some color on these bad boys only to know how they would look like so here they are.




















Model T


Batman


Superman


Punisher


Autobot


Decepticon


Bigote


Large Model T (emblem size 6.8 in. by 4.7 in, recommended for oval width 5.5in. and above)
Small Model T (emblem size 5.5 in. by 3.8 in, recommended for oval width 5.5in. and below)
Large Batman (emblem size 6.8 in. by 4.6 in, recommended for oval width 5.5in. and above)
Small Batman (emblem size 4.8 in. by 3.3 in, recommended for oval width 5.5in. and below)
Large Superman (emblem size 6.5 in. by 4.8 in, recommended for oval width 5.5in. and above)
Small Superman (emblem size 5.4 in. by 4.0 in, recommended for oval width 5.5in. and below)
Large Punisher (emblem size 3.9 in. by 5.0 in, recommended for oval width 5.5in. and above)
Small Punisher (emblem size 3.4 in. by 4.3 in, recommended for oval width 5.5in. and below)
Large Autobot (emblem size 5.6 in. by 5.5 in, recommended for oval width 5.5in. and above)
Small Autobot(emblem size 4.6 in. by 4.5 in, recommended for oval width 5.5in. and below)
Large Decepticon (emblem size 4.9 in. by 5.5 in, recommended for oval width 5.5in. and above)
Small Decepticon (emblem size 4.0 in. by 4.5 in, recommended for oval width 5.5in. and below)
Large Bigote (emblem size 7.9 in. by2.0 in, recommended for oval width 5.5in. and above)
Small Bigote (emblem size 6.0 in. by 1.5 in, recommended for oval width 5.5in. and below)

 

what would a punisher for a front emblem run? i have a 16 tacoma with the trd Grill

 

Punisher emblem is $45 for the large one and $42 for the small one.
Does your grille have an existing Toyota emblem?
If so you can purchase a mid bracket for installation, the mid bracket will fasten onto your existing grille and the Punisher emblem will fasten onto the mid bracket.

 

yes it still has the oem toyota emblem on it. so would i pop the toyota emblem and put the punisher in its place? whats lead time like? are you in social? I'm in culver city and carson area (where i live and where i work)

 

How much for a pair of the Model T for the tow hitch? Not sure what size looks appropriate/good though, small?

 

I recommend the small Model T brother, the large one is made for a better fit on Tundras and Tacomas
You can find the Small Model T as well as a hitch bracket at Diazfabrication.com
The website will give you a price including shipping.

 

I'm located in Hawthorne, work in Redondo Beach
You'll be replacing your factory Toyota emblem with the punisher emblem but you'll need the mid bracket as well.
The mid bracket will have the same configuration as your 2016 Tacoma grille
It is fastened with #10-32 screws.

 

Can this be attached to a mesh grille? Liking that TRD emblem.

 

Tagged

 

Can what be attached?
What are you talking about?
All emblems are designed to be fastened using #10-32 screws so as long as the screw fits on the mesh grille you should be able to install any emblem.
So far I haven't heard of someone not being able to attach an emblem to a mesh grille.

 

Hey Andres I want to get the TRD hitch bracket in black PM sent

 

PM replied

= ]

 

How much is the trd hitch cover with bracket?

 

All emblems are available at Diazfabrication.com
The website will give you a final price including shipping.

 

PM sent.

 

PM Replied

 

Just want to say big thx to Andres for some top notch products . Finally got the last piece of the puzzle, the hitch bracket!

 

Look at that, way cool!

 

I,need a hitch cover if you are still making them in trd with red back ground with the bracket

 

The black TRD's are in stock, however red and blue are by pre-order only.
You can purchase the TRD emblem here: http://www.diazfabrication.com/trd/
Once you purchase let me know and I'll have your order ready in the next batch of June.

-Andres