Only got 1" (Thats what she said)

So, i just recently completed my Bilstein 5100 litton my 2016. Im running the Bilstein 5100s on the second setting from bottom (.85) with eibach/toytech 620b springs. I was expecting a bigger lift as everywhere says you can expect 2.5" from this set up.

Ive been measuring hub to fender after driving to let the truck settle.

Is there anything I can/should do to get about another inch? I've been thinking some top plate spacers. But i really don't wanna take shit apart again and go for another alignment.

or should i just leave it as is? see pics.

 

it looks good, your running 275/70/17's right? I don't know the length of the springs you're using at most new springs(longer)

looked at wheelers, found this
05-13 Tacoma 1.6″ lift

so typically a 2016 gets 0.75" less, so thats about 0.9"+0.85" for the shock setting, 1.75" lift, and that what your truck looks like. Meh it looks good to me, you're not rubbing are you, if you are maybe UCA's are in order with a realignment and about +3 degrees caster.

 

yes. 275/70r17. not sure on spring length. they're the 112-620 Eibach/Toytec front coil springs

 

I just updated my post with some numbers.

 

I'm running total chaos UCAs. I've gotten slight rub twice at almost full lock while running in/out of driveways so far.

 

oh cool deal, so either more + caster or up another inch to level out, you could set the shocks at 1.75 and see how it rides.

anyone else that has a bit more knowledge please chime in, I don't know everything....yet.

 

yea, I've been thinking 1.75 might be an option. but I've read that you cannot go past .85 with the eibach coils. anyone know if thats true?

 

If you were any higher your rear would be too low.

You look pretty damn level as it sits.

 

actually you're right it does sit pretty level. what do you alignment numbers look like?

 

Toe: stock setting
Camber: stock
Caster: 2.4

 

Caster looks good, maybe get em to increase to 3.0 to fix the rubbing, unless it doesn't bother you.