What Have You Done To Your 3rd Gen Today?

Good choice, I'd go that route but they might be too bright for on road use.
I usually have mine on along with headlights at night.

 

That's up to each individual, i only have 700 miles on mine and i have an apt made next week at my Toyota dealer to have transmission fluid checked and u-bolts checked for correct torque. I filled my zerk fittings myself
BTW .. my local Toyota dealer service dept was very understanding and said they would check everything so i have peace of mind knowing tranny was full, bolts torqued correctly etc .. i showed them the thread on here about low trans fluid and they said it's not impossible but that they know some people are not checking it correctly at the correct temperature and thinking it's low when in fact it's not low but rather not coming out the overflow because it's not at correct temperature to check proper level

 

Put the new wheels on... eagerly awaiting the rest of my lift to come in. King extended droop click adjustment are still on backorder.

 

KO2 275/70R17

I had originally planned on going 285 but a member with the same rims, wheels, and suspension that I have said they rub on full turn when flexing and he had to do a CMC and I'm not trying to do that... YET haha

 

No disagreement here. Have my eno and atlas straps under the back seat of my truck with other essential gear right now. Have a spot in the yard setup as well. Just hang it whenever I'm ready!

Slept in an eno doublenest for about a year straight. Put wall anchors in the house and said screw the bed. I really prefer a hammock over most beds... Still use the eno when camping, but the wife makes me sleep in bed with her now. We have a good cali king sized bed... But my back misses the hammock.

 

Tried installing this TRD license plate frame from Amazon, but it didn't line up for my rear plate, so i just put both on without frames.

http://smile.amazon.com/Black-Chrom...&redirect=true&ref_=oh_aui_detailpage_o02_s00

 

This is the one I got and it works great for the rear plate.

$15 LFPartS UV Resistant Slim Style Stainless Steel License Plate Frame Black New 2 Hole

http://www.amazon.com/Stainless-Ste...1&redirect=true&ref_=oh_aui_search_detailpage

 

Got my tractor from the dealer today 26 miles and averaged 16.1 mpg, i think thats pretty good.

 

Those look amazing. Nice job.

 

Plasti Dipped the grill pieces. But decided to go a different route than all black or part black. The surround piece is black also but want to redo it because my can spit a little and dropped a couple globs. We will see what it looks like dry.

 

What it looks like together

 

Looks great !!! What color plasti dip is that?

 

The surround and emblem are black. The mesh part I did with smoke plasti dip. About 5 good coats. Took about half a can to do the mesh part.

 

Great choice of colors, they look awesome together and i'd like to see it when it's put back on your truck

 

So on the hood are all the points supposed to be flush/close to flush? Some of mine are clean and flush while others are cracked/separated, a few seem to not have any glue at all?

 

Has anyone replaced factory 6 x9 speakers? If you does aftermarket 6 x 9's fit? Just wanting to upgrade

 

I'd like to know this to and ... do the aftermarket speakers alone make much difference

 

Here is the list of standard equipment per model:

 

Looks great . how hard was it? OPT7 H-10 ?