I need help buying a kit

EDIT* Going for 3.5" now and picked new suspension system I might get, the link below.

Hey TW, I've been doing a bit of reading and looking at other lifted Tacomas, and I've decided on going with a 3.5" lift the now

I still barely know anything about the pieces and parts, but I won't be installing it so I just need help buying the right kit. I'm looking to get the job done right and not cause as much or any damage over time, and possibly improve any performance.
My Tacoma is a 2015 PreRunner.

Any links, tips, and advice are helpful.

So far I've been looking at this kit,
New link: http://iconvehicledynamics.com/shop...ota-tacoma-0-35-suspension-system-stage2.html

 

Get a fab tech and you won't ragret it, not even 1 letter

 

It's certainly more expensive but why is fab tech a better choice?

 

He's messing with you. Don't go over 3". You will change your truck for the worse forever. Look at bilsteins 5100's or an OME kit. If you go above 2.5" you need uca's. If you have a couple grand to spend look at ICON, Kings or Fox. Search around on the forum this question gets asked 67 times a day and there is a lot of info out there.

 

For 3,000 you can have a pretty gnarly Icon setup. http://iconvehicledynamics.com/shop...5-suspension-system-stage3-w-tubular-uca.html

Don't bother with Fab Tech or Procomp. If the fear of Icons being a bit too stiff is an issue go with add a leaf + bilstein 5100's, + light racing upper arms.

 

ICON FTW

 

Well it doesn't hurt to get extra help, I'm using a mobile view and I'm new to the forums, so it's a bit difficult to find the right answer.

Also I'd like to know your reason for why you prefer a 3" over a 6"?

 

Are you lifting purely for looks or performance?

 

Defiantly go with ICON if you want performance. The 6" is more of a "lift" for show.

 

Get a spindle lift

 

Give Micah down at DownSouth Motorsports a call. Actually, all the guys down there are great. They'll ask you what your plans are for your rig and won't bs you around.

EDIT: mention you're a TW member and you'll get a discount. Good luck

 

I missed that it was a prerunner. LT fo show....

 

Dont worry with all of our expert advise and your credit card you will have a rig ready for the baja 1000 by the end of the year!

 

"Buying a kit" sure leaves the gates open about budget and use purposes, right?!

 

If your 2wd, the spindle kit is much better then the 6" lift. Let me know if you have any specific questions. We sell all brands including Pro Comp

 

Yes, yes it does....

 

I appreciate all the help so far, I'm trying to stay around $2.5k though so I have room for the labor work.

Also I'm mainly going for show and as for performance I just don't want the ride to feel less smooth so to speak...

 

So you want 6" of height just to look cool and you want it to ride smooth, but you don't wheel it and have no intention of offroading?

 

That 6" kit wont necessarily have a smooth ride either. The ICON set up is better overall on and off road.