What Have You Done To Your 3rd Gen Today?

Sneak Peak

 

Freaking bad ass iv been looking at these are they pretty heavy duty and secure

 

Warm weather is finally here! Washed and sealed while smoking some ribs. Bring on the sunshine.

 

what came to be? was just looking at this exhaust and it sounds pretty sweet

 

Thanks made it myself on my plasma cam. Can do about any simple design on 1/8 steel.

 

The Raceface pad is very sweet fits better than i expected perfect. I researched all the pads this one in my opinion is the very best and I picked it up at Dunbar Cycles $129 CAD + Tax

 

Here is the link http://carled-lights.com/toyota-tacoma/

They are night and day difference compared to the stock halogen lights. I worried that they were too bright for oncoming traffic but I haven't been flashed once since I put them in. Going on three months in the truck and I love them.

 

No issues with fit?

 

Where's the grill from? Link?

 

Nope no issues with fit. Install was cake, took out the old bulb, replaced with the LED version and plugged it into the stock connector. I replaced all the bulbs in about 30 min, just had to find a spot to zip tie the little voltage control box they come with.

 

hey guys. I was just installing my LED interior lights I put the dome light in first and it lasted about 30sec and it stopped working. So I put the old one back in and it still does not work so im guessing it popped the fuse. anyone else having this problem? also were is the fuse under the dash or under the hood. thanks
this is the LEDs i bought- http://www.amazon.com/EliteTech-200...&redirect=true&ref_=oh_aui_detailpage_o01_s00

 

Most likely the fuse. Look under your steering wheel right next to your ODB plug in. The lid has the locations and descriptions for your interior fuses.

 

ok thanks. any idea why it popped it the fuse?

 

Must of created some static or minor short circuit. Doesn't take much on these smaller gauge stock wires. Disconnecting your battery would avoid this.

 

I bought these and installed them about 2 weeks ago. So far so good but now this post is causing slight anxiety... hopefully its nothing too serious

 

im sure its not anything big. just no sure why iy popped the fuse it went in fine and worked for a couple sec then I put the cover back on and out went the light.

 

I'm ordering dark gloss grey, from FN Wheels via Dustin who sent me these images.....

 

so I just went to check the fuse i pulled the dome light fuse 7.5 amp and my front two interior lights went off are they all linked together? or am i pulling the wrong fuse.

 

I need to figure out how to get my wife to buy me one.

 

They are not on the FN website. You have to call them directly....preferably Dustin.