What Have You Done To Your 2nd Gen Tacoma Today?

With 1.75" settings on 5100's, I was still able to get around +2.3 caster.

 

Added a little sexy today. I know the DSM isn't the most liked color, but I dig it. Been wanting to do this for a while.

 

I got nearly 2.5" on 5100s set at 1.75 - Access Cab

 

I believe it. 5100's set at zero in a prerunner dc gave about .8" of lift. I measured it several times before and after. I originally started with .85" setting and got about 1.7" lift so I set it to zero. These measurements are all with a 1/4" lean spacer on driver side. Regardless, I measured both sides and we're between 1/8" apart.
Hub to fender measurements and ground to fender as well.

 

Yep. The numbers they list are "average yield" numbers. Most Tacos sold are double cabs, so they're really double cab numbers.

 

Need to fab up a new pair of brackets but I'm digging this dual control lighter that Bailey @Baja Designs sent me. Swapped out the old IPF 900's for a 20" bar and getting the front end ready for test fitting the @RelentlessFab bumper.

 

Added a billet grill yesterday. Went with the cut out method vs. the overlay. It just looks cleaner.
Sunday I did my exhaust upgrade. Installed the MBRP catback turn down. Sounds sweet! Friday I installed my K&N CAI. With the exhaust and intake combo I can definitely feel the difference!

 

I've got that MBRP on my Tundra. Love it. And the price was killer!

 

Any chance you can make a sound clip sometime

 

Mine broke and my dealer has had my truck for 3 weeks (and counting)!

 

I'm running the mbrp cat back, but I've also got volant CAI and LT headers. Still need to install the y pipe.
https://youtu.be/HYGtuO1pHLQ

 

See my post above.

Fabbing up some mounts for mine currently.

Test fitting today..

 

I like that it doesn't sound like a ricer. Good deep growl.

 

Another option for y'all- doesn't sit above the cross bars. (Could only find fab process pics)

 

Nice.

Mine sits perfectly where I want it. Same height/just under the crossbars. Fills the cutout and no glare.

 

I have one, but it's from under the truck with my phone so it's not great quality. I'm working alone here so gotta compromise. Haha!

 

Pretty sweet! We don't have many spots like that down here in
SW TX

 

That was at my buddies house. It was pretty much a quad dirt bike trail. I repurposed it as a truck trail now. I'm the only one to run it in a truck though.

 

Got the leaf spring recall done today. Measured the ass end before I dropped her off and now she sits about 1 1/2 inches higher. Not to sure I like that. Just put shocks/struts on so I don't want to spend the money on the 5100's. Also getting ready to install ride rite air bags for towing the trailer. Suggestions on bringing the front end up?

 

All set in place to harden overnight. I think it looks tight! What say y'all?