17 inch TRD wheels Matte Black.

That makes sense. I have Spidertrax 1.25" spacers. I'll give that a try when I have a chance to remove them.

 

Those look great. Is that matte gray or black?

 

Anybody running these on a stock 1st gen pre runner?

 

Thanks! Went with the black.

 

I ordered mine today. About 2 hours ago. Excited but a little worried about rubbing and what not when I get the tires as well.

 

Think 1st gens are 5 lugs. These are 6 lugs

 

Yoman, where did you get the black lug nuts?

 

Found them on ebay. Even found some gorilla lock nuts. 262259179109 is the item id for the lug nuts. They were under 30$. The lock nuts 400450710956, about 20$. I just did a search for toyota lugs. They need to be mag lug with, 12x1.5. I didn't even think about the tpms sensor tho, they're gray :-(.

 

Thanks youman! Wasn't to thrilled about re-using the oem chrome. Are you running 265s or 275s?

 

265/70. I wanted to stay with a stock tire size, but my stock rim was 16. I'm not sure how it's changed because the new rim is 17. I did remove the front mud flap because it rubbed. I have a 3" lift

 

Here is what I am buying when my rims get here for lug nuts. Just in case someone is looking for some.

http://www.amazon.com/Gorilla-21134...coliid=IFYCSEW7LLE9V&ref_=wl_it_dp_o_pd_S_ttl

 

I think the only difference between a 16' 265 and a 17' 265 is sidewall height, the 16 having a larger sidewall.

I also remember reading in one of the million post that I have read, these wheels have a different back spacing compared to the stock sport wheels. The back spacing may have caused the slight rub you experienced.

Thanks again for the info!

 

Thanks TacoNole!

 

^^60 degee lug nuts will not work

They need to be flat seated like OEM. Here's the link to some black ones. You'll need to order 6 sets of 4.
http://www.amazon.com/Gorilla-Autom...1462816207&sr=1-6&keywords=gorilla+toyota+mag

 

Thank you for that!

 

Someone else had shared these as well. A much cheaper option and they look like they work too.

http://www.ebay.com/itm/24-Pc-OEM-B...-/262259179109?hash=item3d0fdd7e65&rmvSB=true

 

Without going back through all posts, what SIZES tires will these rim accept. Right now I have the stock 265/65r17. Could I order the rims and use my old tires then say go to a wider tire, such as a 270 or 275. As long as I keep the 17" I should be able to vary a little on width, right???

 

As far as I know yes. That setup is used a lot. I opted to go as large as I could stock which is 265/70/17. 270 or 275, you'd need a lift for or risk serious rubbing. I haven't had my truck for a super long time so I am sort of new. Maybe others can weigh in but this is what I know so far.

 

Thanks

 

I'm seriously considering upgrading from my OEM 16" TRD alloy wheels to these simply so I can run the Load Range C BFG KO2's in 265/70/17.

Current tires = Toyo Open Country AT2 Load Range C - 265/75/16 no lift or spacers....all stock. I'll keep 2 for spares.

After reading this thread and comparing the sizes on the tire size compare tool, it appears that this switch should result in virtually the same size tire/wheel setup and should fit just fine.

Is the backspacing different on these 17" wheels? If so, could that cause unforeseen rubbing?

Next question - I've seen many links here for sources of these - Is the original deal still valid?