Norcal Spotted and BS Thread

I do a lot of Apple buildings, there are tons of Apple buildings all over the South Bay, even some we can't mention are Apple.

 

But did you just say it??

 

Thank George!

 

I decline to answer your question

 

They recommended it for the rear as well.

 

75-90 is fine stock. But the others are right, 85-140 with ARB or regear. Will also work stock.

I have the stock transmission bolts in my toolbox at home. I'll look when I get there after 7. I'm not positive manual and auto are the same though

 

This guy must've learned to drive trucks from someone who drives a double bottom dump. They love the run shit over especially stubbed up utilities and fire hydrants!

 

Don't get me started with the double bottom drivers. When possible I shut the water off to the job on rock days.

 

I love bbq'in and staring at my sexy rig

 

Yeah, those guys haul ass.

https://youtu.be/hRhIHgqGqwo

Benny Hill style (Time lapse)

 

@tacomgee stock is top 5" with a flange head, bottom is what relentless sent with skids 5 1/4". Washer not it pic.

Stock is fine thread, other is not. Unsure of pitch... Both are 14mm

What's holding up my trans you ask?!? The other three bolts. Skids are currently off. Good timing

 

Thanks Bret! Thats what i was lookin for.
Putting my skids back on this weekend and wanted to have the proper bolts

 

Who did i see on 85 yesterday about 415. White second gen, LT front with black fiberglass and a baja bumper. I have seen you before. I zipped by on the bike.

 

Nothing going on here today. Just going to post this for no reason.

 

I like the new direction they are taking with their gear setup.

 

Yeah, the AT Habitat is awesome. Still wish someone would offer something like this in the US.



All that in a 5' bed.


And this for the AC & DCLB folks:

http://www.exkab.de/exkab-2.html

Interior:

http://www.exkab.de/exkab-2.html

Those who speak Deutsch will be able to navigate their site better than me.

Makes my setup look like a fuckin Winnebago.

Edit: the interior link didn't work. Just click on "Beispiele Innenausbau" (Interior examples).

 

I ordered a new set of rear springs from Alcan. I have had their product before on my old FJ40. I was pleased with their performance then and I hope to be pleased with them on the Tacoma.

I also ordered a Prinsu Designs rack setup as well. Ill take pics of the before and after with the springs and rack. I hope to get the springs in before the next camping trip.

 

Wannabango*

 

finally got this unit wired and turned on at 8pm