Colorado B.S. Thread

It will also help to use two different color tapes. One for protecting the paint and one as a guide for cutting.

 

New shoes.

 

@chenbro and @SilverGhost are spot on. Mine's a BruteForce, not a Pelfreybilt, but I think they install very similarly.

It's really pretty straight forward. I bet if you searched out pelfreybilt high clearance rear on this site you'd find a bunch of install threads. Might be some good info to be gleaned from there.

One thing I know is that it's good to have a gap. Our frames flex quite a bit offroad and while a nice little 1/8" gap might look good on a mall crawler, it's asking for trouble when you go wheeling. I'd leave a 1/2" gap at least.

If you want to bring your pile over, I really would be happy to help you out.

 

Well the jerry cans are rusted pretty bad on the inside. So I guess i'll have to go a different route for fuel....

 

One of those I cleaned out pretty good.

 

I just checked them. They need work and I don't have time to get to them. I want to make sure they are spot less before I run fuel from those cans. New motor and all.

 

@3378jakesr5

Coming at ya from Dallas... Saw a nice huge DP sign in Detroit but was driving so no picture.

 

My truck down in texas

Now that I'm back

 

If you bring me a few packs of the real sugar one that has the light green color to it ill give you moneys.

 

Any one want a set of weld on sliders for a second gen double cab short bed?? Long story short i have a spare set built and ready for paint. Would be nice if you wanted them next week so i have some more money for the moab fund.

They are new sliders and are at normal tacoma world pricing. Just made an extra one and if any one wanted to buy them and have them now.

This is what they look like. And are all DOM steel and box tube.

 

Is that something that exists? But I'm flying, no truck.

Although riding in my cousins new Colorado... It seems to be a pretty nice truck, and so quiet on the highway.

 

Yes it exists. @ramonortiz55 sent me some and now i wantz more!!

 

How much funding are we talking? Weld-on or bolt on?

 

weld on and shoot me a pm for price. Unless you just want to fund our moab trip.

 

Ok guys
will the stock 2nd gen rims fit with LR UCAs without spacers???
Thinking of switching back to stock rims
What is the back spacing on stock rims??
TIA

 

https://www.tacomaworld.com/threads/wheel-specs.30754/

Not sure if the info listed in this thread is correct for the sport and steel wheels, but it's correct for the off-road wheels.

 

Hey 2016's!!! I was looking at a 16 the other day and noticed how the spare is against the mount. I highly recommend you guys put something between the sidewall of your tire and the metal mount there. With vibration the tire mount will rub through the sidewall no matter how tight it is. It will save your spare.

 

Yeah the tire is already pretty worn down there.

 

Yeah us 1st gens had the same issue. I remembering pulling the spare and seeing the wear. But the 16 are worse then the 1st gens.

 

Camping in 4 hours and 40 minutes.


Kelly Flats and 7-Mile trail cleanup. Hoping to have both open by Memorial Weekend.