What Have You Done To Your 3rd Gen Today?

Me Likey!!!

 

Done!

 

you can get them for less from the dealer and no freight.

 

Just did it, thanks!

 

Your rear u-bolts look loose, did you check them?

 

MAKING A POD/ LIGHT BAR BRACKET FOR THE BED FACING THE BACK. NO DRILL DESIGN JUST FITS IN THE 2 TAPPED HOLES THAT ARE ALREADY IN THE BED. NEE TO MOUNT THE LIGHT AND WIRE IT TO THE BED LIGHT SWITCH (THE OEM ONE THAT IS ALREADY ON THE TRUCK)

 

My local dealers did not have it as cheap. One was $180 and the other was $160. YMMV

 

Wish I would've seen this two months ago.

 

Fender flares are done! I am extremely happy with how it turned out!

 

Where'd you get the American flag sticker?

 

$5 American Flag Black/White Decal Sticker Custom Die-Cut Vinyl USA Merica United States Marines Army Navy Airforce

http://www.amazon.com/American-Stic...&redirect=true&ref_=oh_aui_detailpage_o00_s00

 

Thanks I ordered one

 

Pinstripes removed.

 

question... does anyone know where in the fuse box the factory (oem) bed light switch is going? i want to wire in (splice) in another light using the same switch!

 

Thank You for the feedback. Unfortunately the fog pocket on the Tacoma, 4Runner, and Tundra are at a slight angle away from the center of the vehicle. This causes the gap. If you look straight down from above the fog pocket you will notice the angle. If the light was flush the usable light will be greatly reduced and you would be limited to one pattern.

Let me know if you have any questions! Truck is looking very good.

Thank You,
Bailey, Baja Designs

 

I have the under the rail bed lights and wanted to do splice them in the same switch, but not sure which one.

 

Hey everyone!
First off, thank you to all these post. I have learned a lot and starting to get an idea of what I want to do to the rig.

Picked up my first Tacoma the other day and be happier. Let the modding begin...

 

Since I did my 3" boss lift for my OR, I now the bilstien suspension that comes with the OR. Wasn't sure if this was the right place, but thought I'd see if there was anyone with an SR / SR5 / whatever that was interested in getting them. Has the front shocks and coil overs, and the rear shocks.