What Have You Done To Your 2nd Gen Tacoma Today?

yes in a 2.7 l and did the secondary filter removal

 

yeah i can't do that i'd end up shooting some body

 

Nice. Might have to try that let me know if you notice your lights go on just randomly.

 

i bought a '13 in december from pa and was going to install the lce you've got me a little scared to try it now especially after it took me like 3 hrs to do the front brakes because they were all rusted

 

installing superbumps was a PITA without lifting the truck.

 

i run that filter, easy maintenance compared to all the oiled ones.

 

Got a beach sticker for the Cape.

 

All cleaned up.

 

Any increase in mpg, hp? anything lol?

 

I dont think it did any noticeable difference to my mpg (probably a fraction of a 1mpg), thought throttle did feel a bit better. Overall buy only for ease of maintenance and avoiding disposable filters.

 

I finally installed my URD quick shifter after buying about 6 months ago. Not a hard install to do. Took me longer than most but I was discussing Chris Stapleton's tickets with the wife and I also had to remove and reinstall my console vault for install of quick shifter. Great mod to add to any manual transmission.

 

How did you attach it?

 

Heavy duty double sided tape on the back of the Blackhawk quick disconnect kit. Pretty solid, but removable if I ever want to.

 

Thats what I use to do. I got tired of things getting tangled up, this allows me to have all my other gear at the back of the truck within easy reach and if I need to haul anything else I don't have to remove my poles and they don't get damaged this way.

 

Quick sleeping platform for some memorial weekend camping tonight

 

Yes!! I did one side without lifting, one with it lifted. 1000x easier with it jacked.

Used to have a drop in, found a super cheap afe intake so I sold the drop in with the factory airbox.

Removed rear center caps, sprayed hubs hi-temp black, and replaced my spot beam LED fogs with flood beam LEDs. Spliced in the modified harness extension so they were plug n play. Drove it down to a lake by the house and got a photo at dusk. So glad I got rid of my squeak earlier today.

 

I'm glad I installed it. Just give yourself plenty of time. Took me 4.5 hours. The vast majority of that was getting the old header out. Some have reported the spring bolts were the worst for them. For me, it was all the bolts holding the header and air injection system on. Just make sure you use a 12mm socket and seat it on there really really good and then tap (or bang) the wrench with a hammer to loosen them. Once I started doing that I had good success.

 

Just finished debadging the tailgate! Looks clean!

 

Very nice, did mine too. So clean and easier to clean and keep clean lol.

Clean