***CLOSED*** GROUP BUY: BUILT RIGHT UNIBALL UPPER CONTROL ARMS 1ST AND 2ND GEN TACOMA ***CLOSED***

I've emailed James at Built Right and he is willing to put on a second group buy for stock replacement upper control arms for 1st and 2nd generation Tacomas.

Description:

The Built Right Fab upper control arms are designed to bolt in to the factory location with out any serious modifications. They give you the option of using the factory shocks or up grading to an aftermarket shock. They are easy to align and any good alignment shop will have no problem with them. They are recommended to be used when lift kits are installed to help fix caster and to prevent excessive wear on ball joints. The uniballs allow for better articulation than factory ball joints and last much longer. The arms are constructed of chromoly tube and are all tig welded with a powder coat finish. The arms come with zerk fittings for easy greasing of the bushings. USA made hardware and top lock nuts are used to insure that everything stays nice and tight when out on the trail or around town. All of our products and components that go into Built Right products are all 100% American made. We believe that it is best to keep hard earned American dollars in the hands of hard working Americans, instead of buying products over seas.


PRICE:

There will be a limit of 15 sets. Once that is reached the price will be $470 with free shipping lower 48. I will go over ordering instructions once the limit is reached.


Photos:

 

List:

1. @Delta00 1st Gen ORDERED
2. @justinalldredge19 2nd Gen
3. @Loneknight5 2nd Gen
4. @taco smitty 2nd Gen
5. @azgunrunner 2nd Gen ORDERED
6. @Hashc93 2nd Gen
7. @Crock112 1st Gen
8. @whopchop42 1st Gen ORDERED
9. @ToRriD 2nd Gen
10. @Skavenger 1st Gen
11. @ELKAHOLIC 3rd Gen ORDERED
12. @outdoorAZ 1st Gen ORDERED
13. @Kwik 2nd Gen
14. @shootmymime 3rd Gen 4Runner ORDERED
15. @MACRunner 4th Gen 4Runner

 

@Trowbocop I saw you were looking for some UCA's...

 

I was in on the first group buy and can say these are quality parts, definatly would buy again.

 

add

 

Added!

 

So how hard is it to press the uniball into the control arm?

 

Very easy no pressing just kind of slides in and tighten down with impact when installing.

 

Thanks!

 

Subbed, get paid Friday, gotta see how hefty the check is.

 

Sweet! Thanks!

 

I may want some!

 

Add!

 

Just leeme know

Added!!

 

Will do boss

 

Is there a planned ship out date? When I buy these I plan on rebuilding my COs while I have everything ripped apart and wanted to plan.

 

Well, not entirely. We must reach 15 sets first so it is whenever that happens, then we get ordering/ship date.

 

I'm sure it'll hit 15. But sounds good. I'll touch base again Friday when i'm either elated or severely disappointed by my paycheck

 

Sweet. I'm in.

 

Added!