What Have You Done To Your 3rd Gen Today?

$27 Hella H71071132 Optilux XY Series H11 Xenon Yellow Halogen Bulbs, 12V, 55W, 2 Pack

http://www.amazon.com/gp/aw/d/B002E...ies+h11+12v+55w+xenon+yellow+halogen+bulb+set

 

You should call a Leonard dealer. I think that company makes them for Leonard. Absolutely worth the money. I always put a box in my trucks and this is the best aluminum box I have ever owned. There are only 2 or 3 companies that make 90% of tool boxes. Unless you spend $750 then this is the best option. Just do a thorough visual inspection. All low to mid priced boxes have minor flaws. I think it is mostly manual welders so you can expect a heat mark or a tig wire change in a bead. Good box and highly recommend it.

 

rear wheel drive

 

I can tell a difference in the cab of the truck in temperature. I do believe the shiny reflective material on the Intro-Tech reflects sunlight better than the flat gray color of the Covercraft. The Intro-Tech has a black underside that can be used during the winter to draw heat.

 

http://www.carid.com/truck-covers-usa/american-tail-mate-load-extender-mpn-ax-850.html

All types out there . Some offer the ability to switch between bed and roof heights .

 

Nice, mine as well, only mine came with the utility pole and flag pole option!

 

Topped off all the Zerks which all were bone dry, it was built 5/16. Seems like toyota is still shipping them low. Haven't checked the tranny, but I'm going to dump what's in it anyway and replace it with Redline MT.

 

Are they almost inverted with no load like other people have been saying?

 

Horrible photo, but front end lighting is almost finished.

 

Maybe someone here can help me out. I would like to put a recovery dring/shackle on my front like this on the pic(not my pic) checked out the underneath front bumper and there's no attachment. Is there a mount that I can buy/ link? Thanks in advance

 

Installed one of my sliders from @Mobtown Offroad (when starting the other one I noticed the washer with a nut welded on it was off-center and I couldn't get a bolt through it).

 

I bought it!

 

I got mine from Gladman Performance Fab. I went through their eBay listing since it's free shipping. Not sure if their main site has free shipping. It's just the mounting plate that will use your existing bolts if you have sport. The shackle has to be purchased separate. The links are below for both.
Recovery point bracket
Red shackle

 

Got my trans fluid checked today. 1 quart low... Torqued u-bolts, and greased u-joints a few weeks ago. Still need to take care of the hood and find out how to turn off the seatbelt chime and door open chime

 

It seems the manuals have not been as bad as the autos, but I might take it in to have it checked.

 

Those are nice! Iv'e never seen those.

 

NICE !!! what bulbs did you go with?

 

Low fluid doesn't affect manuals

 

I should buy a 4Runner
I forgot my Strap Benders at home ....

 

This morning I put grease in u joints, 6 pumps till air, an grease came out. Took a picture of exhaust manifold, I guess all the ports come out of the head in one spot. Has to be the smallest exhaust I have ever seen on any engine.