What Have You Done To Your 3rd Gen Today?

Sorry, I meant tapping into the bedight switch, which is right next to my blank spot for the new switch. I was reading on here that a guy did it the same way so that the switch lights up when you turn the dash lights on just like the rest of the oem switches.

 

What size tire?
any lift?

 

Stock tires?
How much lift ?

 

I am getting new tires put on right now. BFG K02 265/70. Stoked! I cannot believe how horrible the stock tires are

 

You should have put "Rolling Rock Addition" lol

 

Man, that blue looks good!

 

For which model? The TRD OR tires aren't terrible by any means but they aren't AT either.

 

It's the Sport. They are seriously horrible. No traction in the snow. And I have had them break loose on me in the rain. And for whatever reason they pick up a ton of road garbage. I have already had three nails pulled out

 

Sucks that we've come to that, but smart thinking.

 

Ahh okay, I was going to say the OR I cannot complain one bit about them. Yes they aren't top of the line but they have been great in the rain (we got 7" of rain yesterday) and offroading!

 

Finally put my SR8's on. Running on 265/65/17 Duratrac's that were on my stock wheels. Will put the 275/70's after I put my lift on and when these go bald...LOL!

 

Got my FN 17" TRD wheels in from Dustin ( dude is awesome! Super helpful!) Price including shipping to Houston, TX $769.00
Color: Dark Gloss Gray.
Got via Discount Tire Nitto Terra Grappler G2 265/70 R17 11 ST 65k miles, including DT full warranty (half price) - $813.48
Minimal, basically can barely hear any tire noise compared to OEM.
Comment from DT, none of the tires needed weights for balancing.
I will put up the OEM tires and rims for sale, $1000.
Drives, looks great!
No lift, stock suspension.

 

Are you tempted to try out the CRAWL demo every time you're in the sand?

 

I installed the Rough Country leveling kit
http://www.roughcountry.com/toyota-leveling-lift-kit-744.html
it is only in the front and I did it on Memorial day with my Father-in-Law.

 

Where did you get your new decals?

 

CBoy808 Hooked me up did a great job!

 

Reached out to fold a cover for the brackets. Emailed with a guy named Kyle. Very understanding, said they get over torqued frequently. Anyway he replaced all the hardware no questions asked.

 

Are you looking for the switch back light to be on only when in accessory mode or when lights are on? I spent a day testing different fuses installing a switchpro last week. I found the best ignition sense signals to come from adding a circuit to the INJ 10 amp fuse or tapping the IGN2-main relay directly. If you want back lighting only when the lights are on you can add a circuit to one of the headlight or DRL fuses. By the way that's the fuse panel under the hood. Everything is hot all the time in the cabin fuse panel.

 

I want the switch back light to be on when the rest of the switches are are, then when I turn on the ditch lights for the switch to become brighter. Someone was telling me thats how the air on board switches work. Its going in the blank where the clutch start cancel button is on manuals. Do you know how I can do that? Sorry I'm retarded when it comes to wiring and your post confused the hell out of me

 

Sounds like it's not taking it out, but getting it back in after the wires are threaded through.