Raleigh North Carolina and surrounding areas

https://www.tacomaworld.com/threads/tw-will-be-dropping-tapatalk-support-this-week-5-22-16.433478/

 

Let me rephrase that do we know if any of that of that stuff fits 05-15? If so I'll take it all

 

Look like it all should but don't know for sure, everything looks identical

 

On-Board(Beef)-Air Oasis XD3000. Who's jumping on this?
https://www.kmwperformance.com/product/om-xd3000

 

Word around town is it would net me about an inch because of how the 16s are. Which would be nice and would hold me over til I get Bp-51s. Also my rear leaf bushings are shot and squeak all the damn time so perfect remedy

 

I'd buy a contractors hotdog compressor and a 2400w inverter before I spent that kinda jack for air.

If you're that in need of air, any Air conditioning compressor can be used as an air pump ( the Oasis is using a York compressor formally used by Ford and Dodge )
The biggest hang up is keeping the pump lubed and cool. Next is mounting it to the engine to be driven by an assessory belt.
The York pump has a contained oiling system like a lawn mower, oil is at a certain level and the spinning crank and rod just splash oil around.
Buddy of mine used a pump off a Honda, had an inline oiler in the intake of the pump, would fill a 5gal portable tank in about 30 seconds @ 50mph in a Suzuki Samurai actually worked pretty damn well.

 

Anyone know anything about legality of ungated dirt roads? Like this one behind food lion, it looks to lead to a pond.

 

Can your rephrase again? My head hurts

 

Sent you a pm

 

If it aint yours and you don't have permission.....

 

I do same idea on the Seagull, the AC Compressor in my OBO, have a oilier before then right after it a seperator

 

I have the suspension from my 2014 Trd off road. Also have a 3in leveling kit on it, if your interested in that. Let me know if your interested by making me an offer. Have everything pictured and some.

 

Firewall

 

Once my paper is complete, I'm thinking I should put the cart before the horse and cut the bed walls for my SOS concepts bumper. Should be picking it up on Tuesday from area 51. Anyone see a reason why I actually need the bumper on hand before cutting'em off?

 

lovely, when ya gonna hook me up?

 

forgive my ignorance, what am I looking at? A/c Compressor with a water separator?

 

My AC compressor is on motor like normal, the top is air intake for the compressor with the oil holder, the when leaves AC compressor it goes thru the bottom one to pull most the oil (AT Fluid) and moisture out, then goes to my frame mounted Range Rover tank (stupid British pipe thread), them my manual air switches come off that to regulator for the lockers

 

Manual air locker switch (no electric solenoid)

 

Id be patient and wait, no going back once you start

 

need a 3/8 extension to do it