What Have You Done To Your 3rd Gen Today?

That's why I actually carry THREE extra cans. You know...so I can use three cans of gas for the fire.

 

Bolted on the RCI Aluminum Front Skid. Better protection and easier oil changes.

 

I know he had the non JBL system. The only guy I know of that has the JBL system is @JasonT87. He has a build thread.
https://www.tacomaworld.com/threads/the-jbl-upgrade-they-didnt-want-you-to-have.433277/

 

This and I greased the U-joints and changed the engine oil @ 1500 miles.

 

Sure am. About to leave here at the end of the month though, after 5 years at this place.

 

Took me about 4 hours by myself to get it all done. The video in another post above was what I followed and it worked out great. No rattling at all, and the system sounds great.

Edit: I had to drill the hole in the panel like the video suggests. I forgot about that part. That was the only cut though.

 

Installed my grill from @customcargrills

 

Spidertrax spacers arrived today and of course i couldn't wait to get them installed to finish the look with the new bushwackers

Before:




After:





Had to do some minor trimming to the bottom portion of the front bushwackers... the CMC has already been done but i seem to still hit at full lock forward and in reverse. I'm on kings 2.5's and have the front middle fender to ground at 39" I'm afraid to raise up the front anymore since i already have 11 threads exposed... if anyone has some ideas on what i can do to get rid of the full lock rub please let me know! trying to prevent having to re-do the CMC...

 

Damn, too bad. I just moved to Bossier City a little over a year ago.

 

Yeah I moved here back in 2011, and the past two years I've been doing about everything I can to get out of here. Never thought I'd be going to Cali, but it is what it is.

I'm pretty sure if you see an inferno driving around here, it's probably me. I haven't seen another one except at the dealers, and he's on here also.

 

Scroll to the bottom of this page and you will find both of the harnesses you need with links. There are quite a few build threads showing how to re-pin the harnesses if you just look in the audio video section.

 

Bought the same shade....!!

 

I don't think any of these is a harness. A link would might be more useful for them.

 

Just left New Orleans for California a year ago. Job related move. What area you headed to? (I'm in the only Inferno in my area!)

 

The Mojave more or less. Edwards AFB.

 

Had a idea a few weeks ago and finally got around to it! Relocated my air conditioning condenser drain! On my 2016 SR!

I was thinking how I've seen so many rusty frames in thst spot cause Toyota designed the drain to dump right out onto the Frame, so was thinking of adding a hose to it and run it down straight to the ground! Bought a 2 foot piece of 5/8" ID heater hose and it fits the small tube coming out of the firewall perfect! Attached a little hose clamp and didn't tighten it to much so you don't pinch shut the hose. Just thought I'd share with you guys! Only cost a few bucks and I'm sure it will pay for itself in the long run!

It works perfectly!!!!

How it looks from the factory :


After I added the extension:

 

^^^ Gonna try that!

 

There are way more things in that box than that. You have to scroll down in the thing man. Sounds like some peeps need to learn how to use the forum....

 

Anyone else have major rust on one side of their leaf springs? It just turned over 10,000 miles. The 5,000 and 10,000 mile services were conducted. The dealer said that they tightened the shackle bolts. I took it to another shop and had it checked for an alignment. They took pictures and called me about it. The alignment is so far off that the exhaust system is even trying to compensate. The other shop is going to fix all of the alignment problems and the tech had me get new nuts for the u-bolts as he doesn't trust them.

 

Finally got around to installing my extra D-Rings in the bed. Put four more in for a total of six in the bed floor.