1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Mobtown Offroad Bolt On Tailgate Reinforcement Plate for 2016+ Tacoma

Discussion in '3rd Gen Tacoma Parts Marketplace (2016-2023)' started by Mobtown Offroad, Mar 18, 2016.

  1. Jun 22, 2016 at 1:41 PM
    #121
    Mobtown Offroad

    Mobtown Offroad [OP] Boss

    Joined:
    Jul 23, 2014
    Member:
    #134511
    Messages:
    10,797
    Gender:
    Male
    First Name:
    Joe
    Harrington, DE
    Vehicle:
    2002 SR5 4Runner
    http://mobtownoffroad.com/wp-conten...nforcement-Skin-Installation-Instructions.pdf

    Instructions can be found on our website, I included the link here as well. It says 2005-2015, but installation is the same. The tabs on the plastic skin get cut off if you opt to install the oem skin back on top of the metal skin from us. I never showed that on the installation instructions but will try to make the time to get them revamped.
     
  2. Jun 22, 2016 at 5:42 PM
    #122
    wudbuchr

    wudbuchr Well-Known Member

    Joined:
    Apr 13, 2012
    Member:
    #76881
    Messages:
    393
    Gender:
    Male
    First Name:
    Linnie
    Lexington, TN
    Vehicle:
    2016 (7128A) BBP 4x2 - TRD Sport Access Cab
    * Clear Bra (full front) * BBP (8T0) Side Body Molding * Tinted Windows with AWS window shades * Romik Running Boards * Color matched Undercover Lux bed cap and BedRug bed liner * MobTown Locking bed storage doors, Tailgate skin and cap * Chrome Tailgate Script lettering * G-Tec Fab Door Sill Protectors and OEM Mud Guards * Fumoto Valve * ScanGauge-II * LED Interior, Stop, tail, Bed, OPT7 LED H11 low beam and fog lights * WeatherTech floor mats * Clazzio seat Covers * Removed jump-seats & rear seat-belts * Sound deadened back wall, rear posts, rear doors and front doors with a layer of RAAMmat, a layer of Ensolite, and a layer of EzCool * Insulated the roof with two layers of EzCool * GT series Image Dynamics speakers (6x9 fronts, 6.5 rears) * Audio Control DQ-61 DSP, 5-channel amplifier and sub woofer. * Redline Tuning Quick Lift Elite hood struts * Thinkware F770 (Dual) Dashcam with Cellink Battery B * Lexus SmartKey Transmitter and Emergency Key
    Thank you Joe - Is the plastic cap stout enough to sit atop your cap without flapping?
    Toyota keeps the cap in place using the clips. If we cut them off, what keeps the plastic
    cap in place? Another question, the picture shows a screw on either end of the cap; are
    these secured by rivet-nuts or are they self tapping screws?
     
  3. Jun 22, 2016 at 5:48 PM
    #123
    Mobtown Offroad

    Mobtown Offroad [OP] Boss

    Joined:
    Jul 23, 2014
    Member:
    #134511
    Messages:
    10,797
    Gender:
    Male
    First Name:
    Joe
    Harrington, DE
    Vehicle:
    2002 SR5 4Runner
    Are we talking about the same thing? Sounds like you are asking about the cap, not the skin? The Toyota plastic cap will install over the Mobtown skin and the Toyota plastic skin, but the Toyota plastic cap will not work with the Mobtown metal cap.
     
  4. Jun 22, 2016 at 6:08 PM
    #124
    wudbuchr

    wudbuchr Well-Known Member

    Joined:
    Apr 13, 2012
    Member:
    #76881
    Messages:
    393
    Gender:
    Male
    First Name:
    Linnie
    Lexington, TN
    Vehicle:
    2016 (7128A) BBP 4x2 - TRD Sport Access Cab
    * Clear Bra (full front) * BBP (8T0) Side Body Molding * Tinted Windows with AWS window shades * Romik Running Boards * Color matched Undercover Lux bed cap and BedRug bed liner * MobTown Locking bed storage doors, Tailgate skin and cap * Chrome Tailgate Script lettering * G-Tec Fab Door Sill Protectors and OEM Mud Guards * Fumoto Valve * ScanGauge-II * LED Interior, Stop, tail, Bed, OPT7 LED H11 low beam and fog lights * WeatherTech floor mats * Clazzio seat Covers * Removed jump-seats & rear seat-belts * Sound deadened back wall, rear posts, rear doors and front doors with a layer of RAAMmat, a layer of Ensolite, and a layer of EzCool * Insulated the roof with two layers of EzCool * GT series Image Dynamics speakers (6x9 fronts, 6.5 rears) * Audio Control DQ-61 DSP, 5-channel amplifier and sub woofer. * Redline Tuning Quick Lift Elite hood struts * Thinkware F770 (Dual) Dashcam with Cellink Battery B * Lexus SmartKey Transmitter and Emergency Key
    Yes Joe, I am talking about the cap. I think I am a little confused. Your installation
    instructions (step 6) reads "If you prefer you can install the OEM plastic skin and
    cap over top of the Mobtown Offroad steel skin". Not trying to be a pest, just
    pointing outthat your instructions imply that the plastic cap can be reinstalled over
    the Mobtowncap, as does your entry (#121) on this thread. I think you commented
    that was so people would not have issues with Tonneaus sealing. Personally, I intend
    to shed the plastic as soon as I get the cap from you.

    Additionally, the picture on your website shows a screw on either end of the cap; are
    these secured by rivet-nuts or are they self tapping screws?
     
  5. Jun 22, 2016 at 6:22 PM
    #125
    Mobtown Offroad

    Mobtown Offroad [OP] Boss

    Joined:
    Jul 23, 2014
    Member:
    #134511
    Messages:
    10,797
    Gender:
    Male
    First Name:
    Joe
    Harrington, DE
    Vehicle:
    2002 SR5 4Runner
    I think we are confusing each other on verbage. Let me try to clear this up.

    This item is what I refer to as the "skin":
    http://mobtownoffroad.com/product/tailgate-skin/

    It can be installed under the factory Toyota plastic tailgate skin (with minor trimming to male tabs under the factory Toyota plastic tailgate skin) and factory Toyota plastic tailgate cap.

    This item is what I refer to as the "cap":
    http://mobtownoffroad.com/product/3rd-gen-tailgate-cap/

    It can be installed under the factory Toyota plastic tailgate skin, but can not be installed under the plastic Toyota plastic cap.

    The screw that you are referring to are factory installed machine screws that are under the factory Toyota plastic tailgate cap. You simply removed the factory Toyota plastic tailgate cap, removed the screws, set our cap in place and reinstall the screws. You can't see that because they are hidden on the factory Toyota plastic cap.
     
    opentang and tomwil like this.
  6. Jun 22, 2016 at 6:38 PM
    #126
    wudbuchr

    wudbuchr Well-Known Member

    Joined:
    Apr 13, 2012
    Member:
    #76881
    Messages:
    393
    Gender:
    Male
    First Name:
    Linnie
    Lexington, TN
    Vehicle:
    2016 (7128A) BBP 4x2 - TRD Sport Access Cab
    * Clear Bra (full front) * BBP (8T0) Side Body Molding * Tinted Windows with AWS window shades * Romik Running Boards * Color matched Undercover Lux bed cap and BedRug bed liner * MobTown Locking bed storage doors, Tailgate skin and cap * Chrome Tailgate Script lettering * G-Tec Fab Door Sill Protectors and OEM Mud Guards * Fumoto Valve * ScanGauge-II * LED Interior, Stop, tail, Bed, OPT7 LED H11 low beam and fog lights * WeatherTech floor mats * Clazzio seat Covers * Removed jump-seats & rear seat-belts * Sound deadened back wall, rear posts, rear doors and front doors with a layer of RAAMmat, a layer of Ensolite, and a layer of EzCool * Insulated the roof with two layers of EzCool * GT series Image Dynamics speakers (6x9 fronts, 6.5 rears) * Audio Control DQ-61 DSP, 5-channel amplifier and sub woofer. * Redline Tuning Quick Lift Elite hood struts * Thinkware F770 (Dual) Dashcam with Cellink Battery B * Lexus SmartKey Transmitter and Emergency Key
    Thank you again Joe, I was not confused regarding the interpretation of your
    instructions which clearly state "you can install the OEM plastic skin and cap
    over top of the Mobtown Offroad steel skin." There are no tabs on the plastic
    tailgate skin to be removed because there are no tabs on the skin. however
    there are on the cap. I do not plan to reuse either plastic piece!

    I appreciate the information about the machine screws for the cap (I hate
    rivet-nuts). The replacement of the cap should take less time than taking it
    out of the shipping carton.
     
  7. Jun 22, 2016 at 6:39 PM
    #127
    Mobtown Offroad

    Mobtown Offroad [OP] Boss

    Joined:
    Jul 23, 2014
    Member:
    #134511
    Messages:
    10,797
    Gender:
    Male
    First Name:
    Joe
    Harrington, DE
    Vehicle:
    2002 SR5 4Runner
    I think I was confusing myself haha.
     
  8. Jun 22, 2016 at 6:45 PM
    #128
    wudbuchr

    wudbuchr Well-Known Member

    Joined:
    Apr 13, 2012
    Member:
    #76881
    Messages:
    393
    Gender:
    Male
    First Name:
    Linnie
    Lexington, TN
    Vehicle:
    2016 (7128A) BBP 4x2 - TRD Sport Access Cab
    * Clear Bra (full front) * BBP (8T0) Side Body Molding * Tinted Windows with AWS window shades * Romik Running Boards * Color matched Undercover Lux bed cap and BedRug bed liner * MobTown Locking bed storage doors, Tailgate skin and cap * Chrome Tailgate Script lettering * G-Tec Fab Door Sill Protectors and OEM Mud Guards * Fumoto Valve * ScanGauge-II * LED Interior, Stop, tail, Bed, OPT7 LED H11 low beam and fog lights * WeatherTech floor mats * Clazzio seat Covers * Removed jump-seats & rear seat-belts * Sound deadened back wall, rear posts, rear doors and front doors with a layer of RAAMmat, a layer of Ensolite, and a layer of EzCool * Insulated the roof with two layers of EzCool * GT series Image Dynamics speakers (6x9 fronts, 6.5 rears) * Audio Control DQ-61 DSP, 5-channel amplifier and sub woofer. * Redline Tuning Quick Lift Elite hood struts * Thinkware F770 (Dual) Dashcam with Cellink Battery B * Lexus SmartKey Transmitter and Emergency Key
    Confusion runs rampant! I was not trying to be belligerent, just trying to minimize
    confusion regarding the ability to make your improvement look more "stock" for
    those of that persuasion. Personally, I like to show off my "usable" tailgate to
    other Taco lovers. Its a shame that my Mobtown skin is covered up by my BedRug!
     
  9. Jun 22, 2016 at 6:50 PM
    #129
    Mobtown Offroad

    Mobtown Offroad [OP] Boss

    Joined:
    Jul 23, 2014
    Member:
    #134511
    Messages:
    10,797
    Gender:
    Male
    First Name:
    Joe
    Harrington, DE
    Vehicle:
    2002 SR5 4Runner
    That is fine with us, we encourage criticism!

    Don't feel bad on covering it, as long as your happy with it, we are too.
     
  10. Jun 22, 2016 at 6:54 PM
    #130
    wudbuchr

    wudbuchr Well-Known Member

    Joined:
    Apr 13, 2012
    Member:
    #76881
    Messages:
    393
    Gender:
    Male
    First Name:
    Linnie
    Lexington, TN
    Vehicle:
    2016 (7128A) BBP 4x2 - TRD Sport Access Cab
    * Clear Bra (full front) * BBP (8T0) Side Body Molding * Tinted Windows with AWS window shades * Romik Running Boards * Color matched Undercover Lux bed cap and BedRug bed liner * MobTown Locking bed storage doors, Tailgate skin and cap * Chrome Tailgate Script lettering * G-Tec Fab Door Sill Protectors and OEM Mud Guards * Fumoto Valve * ScanGauge-II * LED Interior, Stop, tail, Bed, OPT7 LED H11 low beam and fog lights * WeatherTech floor mats * Clazzio seat Covers * Removed jump-seats & rear seat-belts * Sound deadened back wall, rear posts, rear doors and front doors with a layer of RAAMmat, a layer of Ensolite, and a layer of EzCool * Insulated the roof with two layers of EzCool * GT series Image Dynamics speakers (6x9 fronts, 6.5 rears) * Audio Control DQ-61 DSP, 5-channel amplifier and sub woofer. * Redline Tuning Quick Lift Elite hood struts * Thinkware F770 (Dual) Dashcam with Cellink Battery B * Lexus SmartKey Transmitter and Emergency Key
    Joe, as I said the other day, I have your locking storage doors, your tailgate skin and
    now that you are taking orders for the cap, I'm happier that a pig in . . .(well, you
    understand what I mean!). Why, I may even reconsider that rear bumper you're
    working on. . .
     
    Mobtown Offroad[OP] likes this.
  11. Jun 23, 2016 at 6:44 AM
    #131
    xola3que

    xola3que Well-Known Member

    Joined:
    Apr 26, 2016
    Member:
    #185353
    Messages:
    1,768
    Gender:
    Male
    Long Valley, NJ
    2019 Tacoma Sport
    How heavy is the piece? Love the protection but concern about adding any more weight to the tailgate.
     
  12. Jun 23, 2016 at 8:18 AM
    #132
    Mobtown Offroad

    Mobtown Offroad [OP] Boss

    Joined:
    Jul 23, 2014
    Member:
    #134511
    Messages:
    10,797
    Gender:
    Male
    First Name:
    Joe
    Harrington, DE
    Vehicle:
    2002 SR5 4Runner
    26lbs. It speeds up the tailgate drop for sure but the assist still works.
     
    xola3que likes this.
  13. Jun 23, 2016 at 9:27 AM
    #133
    xola3que

    xola3que Well-Known Member

    Joined:
    Apr 26, 2016
    Member:
    #185353
    Messages:
    1,768
    Gender:
    Male
    Long Valley, NJ
    2019 Tacoma Sport
    I'm more worry about lifting the darn thing. Tacoma gate are already heavy as it is.
     
  14. Jun 23, 2016 at 9:54 AM
    #134
    jowybyo

    jowybyo Well-Known Member

    Joined:
    Nov 19, 2013
    Member:
    #116863
    Messages:
    6,092
    Gender:
    Male
    First Name:
    Joe
    Baltimore, MD
    Vehicle:
    '14 MGM DCSB Postrunner 4wd Conversion, Debadged
    I think that's the first time I've heard that.

    The tailgate on a Chevy 2500 is like closing our tailgates with cinder blocks on it.
     
    Danielnc06 likes this.
  15. Jun 30, 2016 at 3:32 PM
    #135
    Mobtown Offroad

    Mobtown Offroad [OP] Boss

    Joined:
    Jul 23, 2014
    Member:
    #134511
    Messages:
    10,797
    Gender:
    Male
    First Name:
    Joe
    Harrington, DE
    Vehicle:
    2002 SR5 4Runner
  16. Jun 30, 2016 at 5:03 PM
    #136
    wudbuchr

    wudbuchr Well-Known Member

    Joined:
    Apr 13, 2012
    Member:
    #76881
    Messages:
    393
    Gender:
    Male
    First Name:
    Linnie
    Lexington, TN
    Vehicle:
    2016 (7128A) BBP 4x2 - TRD Sport Access Cab
    * Clear Bra (full front) * BBP (8T0) Side Body Molding * Tinted Windows with AWS window shades * Romik Running Boards * Color matched Undercover Lux bed cap and BedRug bed liner * MobTown Locking bed storage doors, Tailgate skin and cap * Chrome Tailgate Script lettering * G-Tec Fab Door Sill Protectors and OEM Mud Guards * Fumoto Valve * ScanGauge-II * LED Interior, Stop, tail, Bed, OPT7 LED H11 low beam and fog lights * WeatherTech floor mats * Clazzio seat Covers * Removed jump-seats & rear seat-belts * Sound deadened back wall, rear posts, rear doors and front doors with a layer of RAAMmat, a layer of Ensolite, and a layer of EzCool * Insulated the roof with two layers of EzCool * GT series Image Dynamics speakers (6x9 fronts, 6.5 rears) * Audio Control DQ-61 DSP, 5-channel amplifier and sub woofer. * Redline Tuning Quick Lift Elite hood struts * Thinkware F770 (Dual) Dashcam with Cellink Battery B * Lexus SmartKey Transmitter and Emergency Key
    OK Joe, you didn't mention anything about the 3rd Gen tailgate shipping date so I guess
    we won't be seeing it by July 4th, huh? Just how close are we?
     
  17. Jun 30, 2016 at 5:28 PM
    #137
    Mobtown Offroad

    Mobtown Offroad [OP] Boss

    Joined:
    Jul 23, 2014
    Member:
    #134511
    Messages:
    10,797
    Gender:
    Male
    First Name:
    Joe
    Harrington, DE
    Vehicle:
    2002 SR5 4Runner
    I just sent an email to the laser/powder coat house to see if we can get an eta on them. I asked them to rush them, not sure what the hold up is. I will get back to you as soon as I hear something.
     
  18. Jun 30, 2016 at 5:45 PM
    #138
    wudbuchr

    wudbuchr Well-Known Member

    Joined:
    Apr 13, 2012
    Member:
    #76881
    Messages:
    393
    Gender:
    Male
    First Name:
    Linnie
    Lexington, TN
    Vehicle:
    2016 (7128A) BBP 4x2 - TRD Sport Access Cab
    * Clear Bra (full front) * BBP (8T0) Side Body Molding * Tinted Windows with AWS window shades * Romik Running Boards * Color matched Undercover Lux bed cap and BedRug bed liner * MobTown Locking bed storage doors, Tailgate skin and cap * Chrome Tailgate Script lettering * G-Tec Fab Door Sill Protectors and OEM Mud Guards * Fumoto Valve * ScanGauge-II * LED Interior, Stop, tail, Bed, OPT7 LED H11 low beam and fog lights * WeatherTech floor mats * Clazzio seat Covers * Removed jump-seats & rear seat-belts * Sound deadened back wall, rear posts, rear doors and front doors with a layer of RAAMmat, a layer of Ensolite, and a layer of EzCool * Insulated the roof with two layers of EzCool * GT series Image Dynamics speakers (6x9 fronts, 6.5 rears) * Audio Control DQ-61 DSP, 5-channel amplifier and sub woofer. * Redline Tuning Quick Lift Elite hood struts * Thinkware F770 (Dual) Dashcam with Cellink Battery B * Lexus SmartKey Transmitter and Emergency Key
    Thanks again Joe, as usual, you are on top of everything! Enjoy the weekend with your family.
     
  19. Jun 30, 2016 at 5:47 PM
    #139
    Mobtown Offroad

    Mobtown Offroad [OP] Boss

    Joined:
    Jul 23, 2014
    Member:
    #134511
    Messages:
    10,797
    Gender:
    Male
    First Name:
    Joe
    Harrington, DE
    Vehicle:
    2002 SR5 4Runner
    Odd because he just called me about two hours ago and let us know he has one part done that we have been waiting on but made no mention of the other. We are meeting up with him in the morning and I will be sure to ask when we see him.
     
  20. Jun 30, 2016 at 5:50 PM
    #140
    wudbuchr

    wudbuchr Well-Known Member

    Joined:
    Apr 13, 2012
    Member:
    #76881
    Messages:
    393
    Gender:
    Male
    First Name:
    Linnie
    Lexington, TN
    Vehicle:
    2016 (7128A) BBP 4x2 - TRD Sport Access Cab
    * Clear Bra (full front) * BBP (8T0) Side Body Molding * Tinted Windows with AWS window shades * Romik Running Boards * Color matched Undercover Lux bed cap and BedRug bed liner * MobTown Locking bed storage doors, Tailgate skin and cap * Chrome Tailgate Script lettering * G-Tec Fab Door Sill Protectors and OEM Mud Guards * Fumoto Valve * ScanGauge-II * LED Interior, Stop, tail, Bed, OPT7 LED H11 low beam and fog lights * WeatherTech floor mats * Clazzio seat Covers * Removed jump-seats & rear seat-belts * Sound deadened back wall, rear posts, rear doors and front doors with a layer of RAAMmat, a layer of Ensolite, and a layer of EzCool * Insulated the roof with two layers of EzCool * GT series Image Dynamics speakers (6x9 fronts, 6.5 rears) * Audio Control DQ-61 DSP, 5-channel amplifier and sub woofer. * Redline Tuning Quick Lift Elite hood struts * Thinkware F770 (Dual) Dashcam with Cellink Battery B * Lexus SmartKey Transmitter and Emergency Key
    Sounds like a plan. I know you have a bunch of fans just waiting for "the word."
     
    Mobtown Offroad[OP] likes this.

Products Discussed in

To Top