What Have You Done To Your 3rd Gen Today?

Blazingbluesport · Jun 23, 2016

Hardinms said: ↑

Does any know if the bed extender will fit under the tonneau cover with a bed mat?
Click to expand...

Yes it does

FSUNole · Jun 23, 2016

AZInferno said: ↑

Great choice indeed, black just doesn't cut it for me, black tire, black wheel, I agree about the contrast, even a bronze would look great.
Click to expand...

Yeah, it kind of reminds of the steelies people put on their car in the winter up here.

acemastr · Jun 23, 2016

Boba Fetty said: ↑

Clay bar is sort of the next level up from an actual wax. You want to use a vehicle intended soap first that is meant to remove any existing / current wax or finisher, so that when you're done you just have clean clear coat.

Clay bar goes on immediately following that cleaning since you want zero dirt or dust on the clear coat when you apply. It takes some elbow grease, but your supposed to warm the clay bar (while still in its sealed package) in a bucket of warm to hot water (at least, I've found that to be the easiest method). Don't want to apply it while it's still hard since, one, it would not apply well, and two, it would just be a pain in the ass.

The general method is like wax, in that you do a good sized section, allow it to set a bit, then remove. I've made the mistake though of waiting too long to remove and THAT my good sir, is a shitload of work.

The good thing though is that once you've gone through the trouble, you generally don't have to do it again for a good amount of time, and you can use a synthetic wax / sealant on top of it that applies much easier, and your paint looks like liquid glass, plus it's much more protected!
Click to expand...

I can't tell if he's serious or not... because that's just awful advice lol

SOSHeloPilot · Jun 23, 2016

Boba Fetty said: ↑

Today I learned autocorrect doesn't like the term "derp".
Click to expand...

...^^^... "Auto-correct" has caused me some BIG problems in the past
Lol.

Blazingbluesport · Jun 23, 2016

iyapysnf said: ↑

Well, I spent a shit ton of hours putting my light bar on. I'm not going to sweet coat it, I'm pissed. Following the instructions made for mad frustrations. First off, installing the passenger bracket first as directed only caused interference with feeding the bar through. So, I had to remove the bracket, insert the bar, then re-install the bracket. Also, they do not tell you that you need to loosen the oil cooler bolts to move it out of the way to get the bar in. Finally got the bar in, tightened up the bolts and began wiring. Well, that POS wiring harness was a joke. For whatever reason, it would not work even after I completely rewired it. Connecting the wires from the light bar directly to the battery worked fine, but every time I would connect to the wiring harness, nothing. The green light on the switch would turn on, but no light on the bar. I even tried using a different relay, nothing. I have wired many lights on my old truck and have never had this much trouble.

I finally pulled the harness out and had to come inside and call it a night. I do not know what the hell I did, but I followed multiple diagrams on how to wire a switch using a relay and I am at a complete loss as to what the hell is going on...

Sorry for the rant....
Click to expand...

Sorry for your agravation with the install. But glad to know I wasn't the only one that had trouble doing this mod. I ended up getting a opt7 wiring harness and it was great quality. I also had a defective MICTUNNING switch that caused me some grief. I did a caliraised stealth mount. Light bar seemed good quality but the rest of the stuff they sent was crap. Even their YouTube vid on the install ends after the guy puts on the first bracket. I am betting because they didn't want to show him cursing and throwing wrenches with the rest of the install.

CusterFan · Jun 23, 2016

sorgon82 said: ↑

I have a guilty pleasure also. .. I usually smoke one then clean it and think I know what im doing. That pic is about 1 1/2 months after I clay and waxed.
That tuff shine tire cleaner works amazing for cleaning the tires fallowed with a coat of Perl
Click to expand...

Nice looking truck, Stoney.

CusterFan · Jun 23, 2016

Boba Fetty said: ↑

You're not impressing anyone.
Click to expand...

You are not either dropping all those F-bombs. Guess that makes you feel all grown up.

Drifter16 · Jun 23, 2016

The.Plankton said: ↑

Took the Tacoma to the Shenandoah sky drive for the sunset last week.
Click to expand...

I see your plates are MD plates but if your even in the Shenandoah area again hit me up, I live in the Front Royal area. Deployed right now but will be back around Aug sometime. Great shot btw!

SOSHeloPilot · Jun 23, 2016

TacoMan408 said: ↑

Did my first oil change today at 4,600 miles. Threw in some

$24 Castrol EDGE 0W-20 Advanced Full Synthetic Motor Oil, 5 Quarts

Castrol Edge 0W-20 full synthetic and an OEM filter.

Also replaced the oil filter plastic housing with an aluminum one off eBay. It came with an awesome tool to remove the filter housing too.

Click to expand...

...^^^... I like that idea very much and will do the same ... do you have a link or a Toyota part number to get the aluminum cover (and cool removal tool) ?? ... thanks

iyapysnf · Jun 23, 2016

Blazingbluesport said: ↑

Sorry for your agravation with the install. But glad to know I wasn't the only one that had trouble doing this mod. I ended up getting a opt7 wiring harness and it was great quality. I also had a defective MICTUNNING switch that caused me some grief. I did a caliraised stealth mount. Light bar seemed good quality but the rest of the stuff they sent was crap. Even their YouTube vid on the install ends after the guy puts on the first bracket. I am betting because they didn't want to show him cursing and throwing wrenches with the rest of the install.
Click to expand...

Haha right. I'm going to completely rewire it tonight and if that does not work then I will start throwing stuff as well hahah.

ccallen · Jun 23, 2016

iHoopAlot said: ↑

I went with the BFG KO2s in a 275/70
Click to expand...

What is the deal with this tire...? I realize they are good tires, but I think 90% of the folks on here run this tire. Is there a cult on here that I'm not aware of?

smugly · Jun 23, 2016

ccallen said: ↑

What is the deal with this tire...? I realize they are good tires, but I think 90% of the folks on here run this tire. Is there a cult on here that I'm not aware of?
Click to expand...

People are followers!

Look at mastercraft tires and save your self $400 bucks

CusterFan · Jun 23, 2016

SOSHeloPilot said: ↑

...^^^... I like that idea very much and will do the same ... do you have a link or a Toyota part number to get the aluminum cover (and cool removal tool) ?? ... thanks
Click to expand...

http://www.ebay.com/itm/Toyota-Lexu...lter-cap-15620-31060-/322104354782?rmvSB=true

or

$22 Toyota Genuine Parts - Cap Assy, Oil Filter (15620-31060)

https://www.amazon.com/Genuine-Toyota-15620-31060-Filter-Assembly/dp/B008BHP68A/ref=cm_cd_al_qh_dp_t

ccallen · Jun 23, 2016

smugly said: ↑

People are followers!

Look at mastercraft tires and save your self $400 bucks

Click to expand...

Agreed I got the Mastercraft couser mxt's $150 a tire, and through most of my research they are basically the cooper stt pro's. And they are fantastic!

SothernTaco · Jun 23, 2016

ccallen said: ↑

What is the deal with this tire...? I realize they are good tires, but I think 90% of the folks on here run this tire. Is there a cult on here that I'm not aware of?
Click to expand...

I went against the sheepole and got me some Cooper Discoverer AT3.

ccallen · Jun 23, 2016

irishrye said: ↑

Not meaning to hijack the thread here but is anyone running Toyo MT 265/75r16 with stock suspension? Pics would be much appreciated.
Or if someone could link me to the proper thread as i am new here.
Click to expand...

Not the Toyos but same size and they are great tires and you will save a ton of money! Through research these are basically the cooper stt pro's. I paid $150 per tire.

smugly · Jun 23, 2016

ccallen said: ↑

Agreed I got the Mastercraft couser mxt's $150 a tire, and through most of my research they are basically the cooper stt pro's. And they are fantastic!
Click to expand...

absolutely correct!

Jztaco · Jun 23, 2016

Not to thrilled about this...

SothernTaco · Jun 23, 2016

Installed the Deavers 1.5"-2" AAL. Ill probably get around to the shocks (5100) and Coils (OME 888) this evening or on the weekend.

R.Shaw · Jun 23, 2016

Jztaco said: ↑

Not to thrilled about this...
Click to expand...

What did you back into?

Log in or Sign up

Welcome to Tacoma World!

What Have You Done To Your 3rd Gen Today?

#23901
Blazingbluesport Well-Known Member

#23902
FSUNole Well-Known Member

#23903
acemastr Well-Known Member

#23904
SOSHeloPilot My 1st Muscle Car

#23905
Blazingbluesport Well-Known Member

#23906
CusterFan Well-Known Member

#23907
CusterFan Well-Known Member

#23908
Drifter16 Well-Known Member

#23909
SOSHeloPilot My 1st Muscle Car

#23910
iyapysnf Well-Known Member

#23911
ccallen Well-Known Member

#23912
smugly Well-Known Member

#23913
CusterFan Well-Known Member

#23914
ccallen Well-Known Member

#23915
SothernTaco Well-Known Member

#23916
ccallen Well-Known Member

#23917
smugly Well-Known Member

#23918
Jztaco Well-Known Member

#23919
SothernTaco Well-Known Member

#23920
R.Shaw Well-Known Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

What Have You Done To Your 3rd Gen Today?

#23901 Blazingbluesport Well-Known Member

#23902 FSUNole Well-Known Member

#23903 acemastr Well-Known Member

#23904 SOSHeloPilot My 1st Muscle Car

#23905 Blazingbluesport Well-Known Member

#23906 CusterFan Well-Known Member

#23907 CusterFan Well-Known Member

#23908 Drifter16 Well-Known Member

#23909 SOSHeloPilot My 1st Muscle Car

#23910 iyapysnf Well-Known Member

#23911 ccallen Well-Known Member

#23912 smugly Well-Known Member

#23913 CusterFan Well-Known Member

#23914 ccallen Well-Known Member

#23915 SothernTaco Well-Known Member

#23916 ccallen Well-Known Member

#23917 smugly Well-Known Member

#23918 Jztaco Well-Known Member

#23919 SothernTaco Well-Known Member

#23920 R.Shaw Well-Known Member

Products Discussed in Entire Site Forum: 3rd Gen. Tacomas (2016-2023) Thread: What Have You Done To Your 3rd Gen Today?

#23901
Blazingbluesport Well-Known Member

#23902
FSUNole Well-Known Member

#23903
acemastr Well-Known Member

#23904
SOSHeloPilot My 1st Muscle Car

#23905
Blazingbluesport Well-Known Member

#23906
CusterFan Well-Known Member

#23907
CusterFan Well-Known Member

#23908
Drifter16 Well-Known Member

#23909
SOSHeloPilot My 1st Muscle Car

#23910
iyapysnf Well-Known Member

#23911
ccallen Well-Known Member

#23912
smugly Well-Known Member

#23913
CusterFan Well-Known Member

#23914
ccallen Well-Known Member

#23915
SothernTaco Well-Known Member

#23916
ccallen Well-Known Member

#23917
smugly Well-Known Member

#23918
Jztaco Well-Known Member

#23919
SothernTaco Well-Known Member

#23920
R.Shaw Well-Known Member

Products Discussed in