What Have You Done To Your 2nd Gen Tacoma Today?

2 racks+2nd kayak= catamaran!

 

Installed a RF R500XD1 to power the RF P3SD2 8 inch i used to replace the stock sub I installed a few months ago. Using a Kenwood HU and using the stock jbl amp to power the other speakers that are still stock. Just diconnected the sub connection and the overall system in the truck sounds better. Able to crank it up a bit louder without having distortion in the doors

 

I had my Tacoma for a week it broke down it overheated but no engin lights came on or nothing and the said it is the cylinder heads and there charging me 3000$ for labor and parts dose that price sound right

 

Got my leer installed, somehow had it in my head they would tap the constant 12v at the trailer plug for the overhead light, but no they pulled a wire from the battery underneath the truck along the frame rails. No loom, stretched around corners , going to have to be redone...this is a heads up to all getting shells. Also an excuse to do it properly and put a six fuse bluesea in the back.

 

Did you get the LED light? I bought one and what a difference it makes. I also ran my constant hot wire from the battery, but I did use that plastic wire loom over the wire and I also put an inline fuse.

 

Ya it came with an led, I plan to add led tape light around the roof of the shells. They did put an inline fuse for the wire ...

 

I also have the factory LED corner lights installed in the bed as well, its plenty of light for me.

 

Cant you just give me the 30 second news report so I can keep pretending not to care

 

I'm still cleaning red clay out of my Tacoma from a trip three years ago! I keep finding it no matter how many washes it has had.

On topic, I started a packing list for this weekends trip and went chainsaw shopping in my baby.

 

Lawn sprinkler under the truck makes it easier. Just park in your yard and let it work.

 

Maybe on the slight high side for price but it's around that for warped heads. Sorry to hear that.

 

This happened to me. My shell also kept pulling up the rubber lining after offroading. After they fixed it three times they finally asked me if they could seal it and bolt the shell onto my bed. Keep a look out between the cab and shell that's where mine kept lifting.

 

What truck do you have. Where did you get it and who quoted you that price.

 

So here's the pics from yesterday... My Icon stage 3 kit and new wheels, ProComp La Paz 16"...






And today I mounted up my Hi-Lift with the brackets I bought from @NateMob... Not sure I'll keep the cover on the thing all the time though.

 

Picture of the lights at night. And my truck is in the driveway which also has a little slope to it. The light would throw a little farther parked on flat ground.

 

Just got my RSI led headlight conversion on a GB....will post pics once I get them in...

 

Yeah, can we get a brief synopsis? I'm not gonna scroll through 130 pages...
Does anyone know anything about the bumpers in question? Any good?

 

Thanks for the night picture. Did you use spots or floods?