Colorado Trading Post

All spoken for

 

2016 TRD Off Road Bilsteins take offs. Only 1800 miles on them as I just swapped with 5100's . No coils. Located in Fort Collins. $150

 

SOLD.

I have 4 Dynapro ATM tires that have 6 to 7 32nds of tread left on them. Good to get someone through for awhile. 265/70R17 is the size. $100.

 

SOLD!!!!!

 

I have an Avec 30" light bar for sale. I really like it and wouldn't be getting rid of it except it doesn't fit in my new bumper so I want to get a shorter one. The bar comes with the mounting brackets, rubber vibration isolators, wiring harness including a 30A fuse and 40A relay. It does NOT come with any type of switch. I wired it up to an air on board switch that I located in one of the blanks under the AC controls. This bar mounts perfectly to the crash cans to shine through the lower valence of a stock '12-'15. It likely would fit well on other years too but I cannot confirm. Asking $100.

 

BUMP? I'll lower it to $1000 for TW

 

Damn, I like that. Can't swing it at the moment though. I'm on a freeze for truck stuff right now. Might be interested later on if it's still available though. GLWS!

 

WTB a 315/75/16 tire for a spare if anybody knows of one laying around. I would prefer a maxxis bighorn or mud tire if possible. I just got the others mounted and my 4.88 gears in, but have no spare.

 

Same as that guy ^ need a 315/75/16 MT if anyones got one..

Also, does anyone need stock front suspension for a gen2? Or a black 2007 front bumper?

 

PM sent

 

I will have a drivers side tail avail in the next few days. Just waiting for my new ones to arrive.

 

Nice, the stock red tail? Mind I ask the price/Condition? Thanks!

 

Photos attached. Some slight scratches, no cracks. No charge. Beer donations appreciated

 

IF ONLY THAT WAS THE PASSENGER SIDE!!!! although i know why you are getting new ones get that CB cable all sorted out and hooked back up buddy?

 

It's working, but I still need to replace the coax end. I had to shorten the wire and re-attached it with a ring terminal before leaving Moab. It's not as clear as it was and I'm getting a higher SWR.

 

Did you get your compressor sorted out before Moab? What turned out to be the issue? Was it the pressure switch?

 

It turned out to be the 40amp fuse by the battery, which I swapped for 50amp and haven't had any problems since. I had ruled out the fuse without even checking it because the cooling fan was coming on when I flipped the switch, but apparently the fan is powered by the 12v fuse tap that runs the switch. I will probably swap out with a circuit breaker when I run my aux box.

 

So it wasn't me

 

It was most definitely you. My tires didn't blow the fuse!

 

I just helped bring the issue to light so you wouldn't have to worry about it happening randomly in Moab