Trd pro 2 inch lift

Yeah I remember you were a fan of them. You'll be happy with them for sure. I loved them too. I just saw these SCS wheels and had to have these instead. Can't wait to see your pics!!

 

I know on the thread for these wheels there is a couple guys with a silver truck and grey wheels that you can reference. I love how these stick out from the fender.

 

So this part - PTR13-35120 - is essentially a Toyota designed 1.75 - 2" lift that is more or less worry free when it comes to vibes and "taco lean" ?

Do most dealerships offer to supply and install the kit?

 

Toyota engineers help design it, bilstien built the shocks and Eibach the coils I believe. Yes, it is worry free......Toyota wouldn't stamp thier name all over it if it wasn't or slap it stock on three of thier vehicles.
As far as who has it. eBay usually has a couple dealers selling it at good deals and if you look up a member on here "unchained 5150" he posted up a thread that will direct you to a dealer that sells it too I believe.

Edit....here it is from unchained 5150 put in $1549 in best offer and you'll get it!! http://www.ebay.com/itm/2015-Toyota-Tacoma-TRD-Pro-Full-Suspension-Kit-PTR13-35150-/252425019985

 

Worked the suspension yesterday at the Cleghorn trail. Handled well.

 

@beachingtaco, and @steveh_2007. I'm thinking about installing the Pro suspension with an ICON aal in the rear. I would be leaving the overload in place for hauling and towing purposes. My question is did either of you notice any driveline vibrations with your lifts? Thanks for your help!

 

Nice pic. Are the rear resi mounting brackets in there somewhere???

 

Damnit! Every time I see a Tacoma with these 4Runner Trail wheels, it makes it that much harder to spring for with the gray SEMA wheels. Maybe I should just find a set of Trails and have them powdercoated.....

 

Sorry for the late responce, unfortunately i just haven't had a weekend yet to install the lift but soon!

 

Yes, they were attached to the box. I just didn't want to pull them off for the pic, waiting untill i install them.

 

No worries! Thanks for the reply. Please let me know what you think after you've gotten it all installed.

 

I def will.

 

Pics of your trucks stance with that suspension setup?

 

Question for you guys that installed your own Baja/Pro front coilovers. Did you have to remove or loosen any parts to remove and install the front shocks? (Other than the three tophat bolts and one bottom shock bolt). Looks like it might be a tad tight. I'm planning on install a Pro setup in the next day or two.

 

Absolutely. As soon as I have it installed! Haven't got a chance to yet...

 

I had that installed at Toyota as I didn't have time. You will love it. We just swapped a 2016 sport suspension to a 2016 OR suspension (one shock was leaking at 14k miles on the sport). Anyway, we had to loosen a bunch to get the shock/coil out. the sway bar ETC... The back was pretty tough. The sport shock are easy to compress and the OR shocks were a two people job to compress. The shocks in the back will twist and twist and not loosen. So vice grips are needed. My advice is have a buddy help.

 

so dirty

 

Alright fellas, I can't find enough pics of Bajas or Pros with the Toytec seat spacer installed.

Looks like I'll have to take matters into my own hands. Will hopefully install it this weekend with pics to follow.

This rake has to go.

 

beachingtaco
Have you installed your new kit yet? Pictures please. Is that the icon AAL?

 

Sorry, it's killing me too but not yet......it's a progressive AAL in the pic