What Have You Done To Your 2nd Gen Tacoma Today?

Today I Siphoned my first full tank of fuel and the hose is stuck in the tank, I cant get the hose out.
Any ideas that won`t invole removing the tank ?



P.S. Had to lighten the load because a strap had broken.

 

Mine came from Cali. (previous owner) and after a few years here its starting to look like I need to get on it.

 

I have no clue...SOMEBODY HELP THIS MAN!!!

 

Its probably not stuck in the tank. Its probably stuck on the flap that keeps people from doing this. Remove the filler neck and pull it out

 

Installed under-hood LED spotlight with sealed on/off switch and grouped and cleaned up all my hot wires to my light bar and other lights.

 

It easy to do with a small pancake compressor and a undercoating gun. I do mine each fall and I can do it in about 30 min. A gal last me 3 yrs.

 

Got around to put them on thanks @CBoy808

 

Thanks for the great idea. I was drawing a blank

 

Re-dipped my rear bumper after having it replaced after a rear-end accident. Looks soo much better black instead of chrome!



While I was at it, I replaced the crappy led tag lights I had that flickered like a disco show...(that's what I get for being cheap and not ordering from a reputable source)....

And...discovered I am missing one of my roof rubber strips.. does anyone know if I would need it for the OEM roof rack install? Or if I order the rack can I get away without having it and negate having to replace it? This gives me a good excuse to actually order a roof rack finally...I have wanted one forever!) Rather than just replace the stupid strip....

 

Driving in Vegas has led me to investing in one of these...cray cray on the roads, daily. Not a bad install...hardwiring takes the most time. Like the peace of mind and maybe I'll snag a Viral shot some day.

 

Looks MEGA clean!! Can you post night pics tonight?

 

You don't need them at all. The rack has little sections of channel cover on each end.

 

Hit some local trails and crossed some water

 

Congrats my 3 month likes the ride in the taco better too!

 

You got screwed by your own anti-siphon gizmo. I have no idea where you go from here. Good luck buddy

 

@Ohiophil his siphon hose went full retard

 

My rear pinion was leaking or so I thought. When I got the flange out of the diff, turns out the oil was getting through the splines and coming out of the flange that the drive shaft bolts to. So cleaned up the teeth on the flange and the pinion and put some gasket maker on the teeth and the flange. So far so good. No leaks. Also got my parts in for my 3 inch lift in the front. 887 and LR UCA, just need a weekend on call so I have the work truck to get around to do the swap over.

 

Detroit Truetrac installed.... here's my old carrier...

 

Dropped the trans skid to grease the driveshafts. Will replace the T-case fluid tomorrow.

 

looks great