Recommendations for LED fog lights

OPT7 H11

 

They are on $79 Ebay and Amazon $99

 

If you want a second set of high beams to blind other drivers, then use the opt7 in your fogs.

If you want them to be functional as fog lights, look elsewhere.

 

http://www.diodedynamics.com/store/2012-2013-toyota-tacoma-fog-light-leds-pair#!prettyPhoto

DD makes great high quality LED's it's all I've ever ran on my previous two cars. The XML2 are effin BRIGHT!

 

Squadron Pro R. They are wide cornering leds with 4,300 lumens. This photo is with the regular lights and Bajas on.

 

Regular headlights for comparison.

 

Makes the headlights seem pitiful.

 

Yeah it does, but you can't drive around with these fogs on as you'll blind the oncoming drivers.

 

Those are the ones I just ordered on recommendation from Bailey of Baja Designs. Looks like there's still less blinding glare than what I'm seeing with the opt7 bulbs. Any chance you could take a pic showing the cutoff?

 

Pics of the fogs from the front? How was the install?

 

I had the dealer install them, so I have no clue.

 

Not flush, but that doesn't bother me.

 

How are the Opt7's in the rain as headlights?

 

Fine. Similar to the stock lights, but white instead of yellow.

 

http://www.danielsternlighting.com/tech/lights/fog_lamps/fog_lamps.html

Go with a quality bulb in there (e.g., my truck will use H11s), and make sure you're using them properly, as described above:

Philips H11 X-tremeVision Upgrade Headlight Bulb (Pack of 2)

https://www.amazon.com/dp/B00BQWQN1Q/

 

Drivers side is rsi fog and passenger side is stock.

 

Something to consider. https://www.tacomaworld.com/threads/the-ultimate-foglight-upgrade-not-led-or-hid.435419/

Also, if you want foglights for actual use in low visibility conditions, like fog or snow, you want yellow lights, not bright white.

If you are trying to create driving lights for dark rural areas, that can be accomplished with many headlight, driving light and light bar upgrades.

 

I live in California. More for additional light as there's not much fog here.

 

Anyone run into the issue where LED bulb polarity is backwards on the truck and the bulbs don't light up?

 

Mine plugged into the stock harness. It's kinda foolproof. Do yours have wire terminals on them?