Tire differences?

i am going from stock 265/70/16 to 285/70/17. How much higher will that make much truck sit?

 

be prepared to cut with 285s....

 

It's getting professionally done with -12 off set so I won't rub.

 

I'm getting it done professionally with -12 offset and they said I won't rub.

 

My bad then..

 

Does that sound legit?

 

I had to trim plastic just driving, lock to lock and entering steep mall parking lots and driveways..

 

What's your offset

 

-12mm will make it rub the back side of the front bumper liner on a stock bumper, as well as mud flaps, fender liners in the rear of the front wheel wells, and also the cab mount most likely. Just expect to have to do the trimming, everyone does. If the cab mount gets cut, we have weld-in plates on our website to re-box the cab mount

 

^Sounds like I have -12mm too..I had to do all of that..

 

How big is your lift

 

3" little more in the rear with a shackle flip installed, +1 leaf on the Dakars

 

Well shit, the guy told me I wouldn't rub so if I do I'll make him fix it haha

 

I can never trust the professionals..especially when it comes to lifts, wheels/tires etc..

Like Eric said, it's all different and it depends how you drive. If you wheel, you will be cutting more..I did all the above mentioned and I still have to cut more..

 

Yeah I mean I don't go off roading with it or anything. It's only a prerunner. So hopefully I can drive without running while turning