AZ BS Thread 4²0

eBay!

 

Same stuff I have. And yeah I got my pans at safeway

 

I love instant gratification, it costs me a premium but worth it hah.

 

Just had 5lb of refrigerant dumped into my ac for the house. Hopefully that resolves the issue. At least I had the new kind so it was only 30$ a lb.

House already is cooling faster as it dropped 3° in 45 min and its peak time for heat upstairs.

 

Tonight is a margaritas night.

Brauts in beer and a family movie.

T -6 days until "The Ride" (72 hours of work between then and now).

 

Going to derp my stock wheels until I can finally justify replacing them... We'll see how this shiz works out.

 

By the way, I have a 608 Universal and I am a low temp mechanic. Did they leak check the unit? Typical system charge on a heat pump is between 5-10 lbs depending on line set length and size of unit. That is a lot of 410a to lose.

 

15 lbs estimate and a 10 year old unit. Said a leak down test may not be needed. No freezing on the coils everything else is normal. Come spring ill do a tune up and check the system again. If its low, then ill do the leak down. This is what was suggested at least. Im going to watch it over the next few weeks. If it drops in performance ill call them back.

 

If you need help, PM me, I have a Leak Detector that would help speed up the process. Who likes being the attic, even during fall?

 

QT and Costco are my go to

 

At least then it wont be 120 up there. Thanks man!

 

So I'm at a kids birthday party and realized the closest thing I'll ever come to being a God would be the man in charge of the rope connected to the piñata.

*proceeds to sip his beer just a little longer *

 

Question for you AZ peeps. Where is a good place to get some sliders around those parts? My taco is gonna need a set. Like next month

Thanks in advance for the heads up.

 

Phoenix valley area go to Avid Offroad
If you are going to be in the Tucson area PM @JeepAndrew

 

Avid

 

Avid. Sdhq.

 

Thanks gents!!

 

I second Avid, but you wont have them by next month.

 

RPMFab in Tempe, Don and his boys can build a thing or two and his lead tech is a Toy guy.

 

I can get you set up with Avid if you would like