Lifted '16 Tacomas

What size tires on yours?

 

275/70r17

 

Deaver said they built the springs to handle around 1200lbs dynamic with a 2" lift. I've got storage system, fridge, 13 gallon water tank and all the extra stuff for any bug out scenario. I've taken my Taco to Happy Valley SVRA with no issues, yet.

 

I'll have to keep you in mind if I need springs on my rig. During hunting season I carry 15 gal of fresh water, 2 dogs (150lbs total), their kennels and food, my canvas tent, gear, guns, ammo and my food for a week at a time. I suspect 500lbs in/on the bed. Maybe a little more.

 

I apologize if I missed this somewhere in my searches but I was wondering if anyone has a picture of a lift setup with Bilstein 5100 paired with OME 885 coil springs and a top 1/4 spacer on the driver's side. And then some type of AAL in the rear. I am researching this setup and have seen it on an Access Cab but I am looking for it on a 3rd gen 4x4 DC. If anyone could post a picture or PM me a link I would really appreciate it!

 

I have this set up, the rear with toytec AAL in the rear with a 1/2" spacer on the drivers rear too.

ETA: SR 4X4 DCSB Bilsteins @ 0, OME 885, Rear Toytec AAL, 1/4 spacer front and 1/2 rear for lean and a longer set of U-bolts for drivers rear.

 

Looks great! I am trying to decide between 887 or 885 coils. I have 885 coils ready to install but the majority of trucks I have seen have 887 it seems. So I'm trying to find a bunch of trucks with 885 to convince myself it is the way to go

 

Too add there is also a steel skid plate and recovery bar from MOBTOWN off-road. and haven't noticed a change in height. Had the lift and all for about 3 months.

ETA: Plus my fat ass.

 

-King extended travel 2.5" coil overs with reservoir
-Total Chaos upper control arms
-King 2.5" rear shocks with reservoir
-Icon Vehicle Dynamics 1.5" add a leaf pack
-BF Goodrich LT 285 70 17 All Terrain KO2
-FN FX Pro matte black 17"x 8"

 

Looks like total junk, I'll PM my address so that you can ship it to me for disposal so you don't embarrass your self further. No disposal fee, It's the least I can do.

 

I will be doing the exact same suspension setup, different wheels/tires. Looks great!

 

when installing the deavers aal; does the slightly longer end face to the front or rear?
thank you.
EDIT- found out it on the toytec site. longer end faces the rear.

 

So as my previous post stated, tire shop scratched all 4 wheels down to the metal in multiple locations, screwed up my alignment worse than it was when I brought it in, and broke 2 TPMS sensors. Saturday morning they worked on my alignment for about an hour and it rides great now. They also agreed to replace all 4 wheels as well as both TPMS sensors at their expense as it should be. So far the customer service has been great. If only their mechanics were as good as their managers.

 

Cool center caps, I have some on watch on eBay. Where did you get them? I have the same wheels.

 

Are you sure you have the same wheels?
Mine are FN FX Pro wheels. I got the center caps with the wheels.

 

Oh thought they were the TRD pro 4Runner wheels?

 

@Str8Dmass18
Been meaning to ask now that you have your UCA's how the ride is as well as your alignment specs and any rubbing with your 285's. I was never sure if you had a 4x4 or not as that seems to come into play. Truck looks good and I am sure your ride will settle if it is a bit rough or not..anyhow glad to see you post up.

 

That is a sweet ride you got there!! love it naked with no badges or decals

 

how does the Icon leafs compare to others?