MARYLAND TACOMAS

That's what Brady said.

 

Deflateagate!

 

Same. I am not out hoping through rock gardens and shit. Airing down is pointless for everything around here, unless I am surf fishing. You are just asking to pop a bead or puncture a side wall.

 

Sand is the only reason. And i avoid sand like the plague

 

Its hell on everything. Bearings, transmission, transfer case, diffs.

Its one reason I bought the T4R from Dave. I dont want to take the ferd on the sand. Plus, rust and sand.

 

Precisely.

 

Good way. If you look at repair rates over the last few years, KitchenAid (part of the Whirlpool Corporation) is reliable across the board whereas other major manufactures have glaring weaknesses (like GE with refrigeration and dishwashing).

Granted this isn't a blanket statement saying "all kitchenaid appliances are good"... I'm saying that if you buy 1000 KitchenAid kitchens and 1000 GE kitchens, your GE kitchens will need to repaired more often than the KitchenAid kitchens. Individual results may vary.

 

Im going to push for an ext warranty and if it ever acts up again, itll get repaired then sold.

Thanks for the helpful info.

 

Let me know if you need any help. My family owns a small chain of appliance stores in Maryland, closest one to you would be in Annapolis.

 

Will do.

 

2 of us let out some air because of having larger tires and there was a lot of sharp rocks on the trail and @fatfurious2 has a small cut in is tire from when he was there a few weeks ago and I don't feel like getting a flat on the trail better safe then sorry

 

The trail there is a mix of hard pack dirt ,large and small rocks and Sand

 

If im going to keep tearing tires, im just going to slowly switch to the tires that I wanted originally.. Cooper ST Maxx..

This tear was from the previous trip. Didnt even notice until I got all the way home. Good thing I wasnt leaking air

 

Damn Gina! Id be nervous just to drive down a highway with that.

 

Ask @jowybyo how he bought his. He did some sort of voodoo magic on eBay and they basically paid him to take them.

 

This one has now been replaced. The new tear is about 1" and doesn't fold over. Ill get a picture in a little while

 

getting better at this electro-chemical etching thing.

etched a 20 oz tumbler for my mom, and the small tumbler and koozie for my brother. all 3 have their respective initials on one side. my brother's has a wakeboarder doing a backflip on the other side, and my moms has an anchor.





the wakeboarder wraps about half way around the cup/koozie, so it's hard to get a full shot of the etching

 

This is the current tear @Mobtown Offroad

 

Yay, more storms rolling in.... cant i get one week without it raining for once?

 

Ordered an ultragauge last night. Anyone else have one? Suggestions on mounting?