OME's for 2016

Are you running stock upper control arms? Did you have an alignment done?

 

255/80/17

 

Light racing and yes

 

What's your caster set at?

 

I think if I set the caster higher it won't rub I just called the place waiting for a call back

 

I have the same UCAs as you do with 32" and I'm sitting at about 2.5 caster. You may need to go up to 3 if you can.

 

My shop kept adjusting and road testing until they got it just right, didn't charge me for the extra time either.

 

Ok thanks man hopefully we can go to 3 and they don't freaking charge me again

 

Not sure if this is a shop you use exclusively but they should have road tested it before they gave it to you. Find yourself a shop you can trust and use only them for your alignments. I know it isn't rocket science and anyone should be able to do this but I've been using the same shop for 15 years. The attention to detail and customer care I receive is unsurpassed. This could be in part that it isn't a franchise tire shop but still, if they try to charge you tell them to stuff it and go elsewhere.

 

No worries brother. Let us know how it goes.

 

Yeah, I had a little rubbing until I pushed my caster to 2.9. Your 80's are taller than my 285/75/17's though.

 

my caster is at 3.0-3.5 and same size tire, doesn't rub the frame but my tire hits the mud flap. Not too big of a deal for me

 

Any of you guys decide to run spacers on top of the kit and trim packer? My 888's settled a decent amount, and I can't decide if I should leave it alone, or run a pair of headstrong 1/4" spacers.

 

How far away is your tire from hitting the front wheel well? Any rubbing while wheeling

 

Yes it rubs while wheeling. On the street I have maybe 1/8" of clearance between the tire and mud flap. The flaps are 3/16" or so thick.

 

So it only rubs on your mud flaps not the wheel well?

 

Correct. If I really stuff it, tires will hit the inner fender

 

So I got my caster set at 3.0 way less rubbing but still nips the cab mount when in full turn and hit a bump. So looks like I have to do a cab mount chop bc I will be banging and rubbing that thing when wheeling

 

Gotmy OME lift installed today. I must say it rides waybetter than stock. 887 coils with Headstrong 1/4" spacer, Dakar leafs, Light Racing UCA's, extended brake lines and 275/70/17 KO2'sinstalled...

 

Any alignment issues?