Lifted '16 Tacomas

Whole pack was installed. I have a shell on order so I didn't want to remove any leafs.

 

Nice, one more question. Are you running a 1/4 spacer on both sides or just drivers side for the lean? Thanks for your time.

 

Both. I have the OME trim packer on the drivers side. I plan to take the 1/4" spacers off when I switch out the coils to 886. I plan to run a front bumper and winch in the near future.

 

Gotcha. Yeah, I'm planning on running the 886 for a bumper and winch too. Just trying to decide on my setup til then. Thinking of going with the 888's for now. Thanks again

 

No problem. If OME had 888's when the group buy going on I would've bought those instead...LOL! Can't wait to see your truck lifted...

 

Hows the ride?

 

me or him. im certainly not. lol.

 

Duh. lol

 

How do you like the lift on the dclb? What set up are you running? What tire and wheel size? And how did it effect the mpg? I really like the look of your truck and thinking about doing something similar to mine. Nice taco!

 

If I do a wheelers 2" add-a-leaf with the 1/2 shim on the drivers side will I need extended length u-bolts?

 

Billy 6112 on 3rd setting with 5160 in rear and progressive 3 leaf, no overload. I ended up with 1.5 of lift all the way around after everything settled.

 

truck looks great, have very similar setup and curious how tight the rear brake cables are? i reused the brackets that hold them but they seem to be fairly tight with them on and wasnt sure if i should cut them out of bend them away

 

They seem to be alright. I drilled the hole on them about 1/16" larger and mounted them to the bolt on the new springs, for the bracket that keeps the pack together if that makes sense

 

Hate to thread jack, but I need some advice. I have a 2016 dclb and I am thinking about the fox ultimate lift kit and 32inch tires. Anyone have experience with the fox lift? I really want more ground clearence and I'm not someone who buys cheap s***, so spacer lift is out+ I wheel my truck pretty regularly. I'm thinking I want to spend 5-6k for lift wheels and tires. I also don't want to have any rub. Any suggestions or recommendations?

 

Like so @brich999

 

thanks, thats what i did to mine and they look the same. just feels a bit tighter than i expected

 

I'm not too concerned but now that you bring it up I am curious what others are doing. I will say it seemed fine at full droop when I had it on jack stands after install.

 

Tire rub won't be a concern with 32's.

 

Why do you need to get involved? Do you have a lot of time on your hands or no friends?