No Longer Available

No problem

 

There is a ton of 3rd Gen info here in our old group buy thread, near the end. This might help you! https://www.tacomaworld.com/threads/apex-cali-raised-led-and-mount-group-buy-closed.435029/

 

Just wanted to post an update, I have a very large order at the powder coater as we speak. I will have a large inventory of all styles of mounts by Friday. If anyone has any questions please let me know!!!

 

Check the link I posted a couple posts up. Post one has a link to a write up and people discuss at the end of the thread

 

As per post #261,

First connect the black wires together- ground complete.
Connect small red wire from Cali harness to green from switch.
Connect white from Cali harness to red/ yellow wire next to green wire on switch.
Last connect red/ yellow wire next to black wire on switch to a circuit that gets power when your lights are on- this is optional but the 3 others are required to work correctly. Let me know if this works for you.

Post any questions on here, as i have become pretty proficient in wiring these hehe

 

Thank you very much for the help!!!!

 

Ya, i just made the fixes today. I just went to home depot to pick up some metal brackets, and moved the intercooler pump, little more lower and to driver side. The light bar with the stealth mounting brackets is exactly in the same position was. So i just painted the brackets black, use original screws to go to screw the brackets to new original holes. Then screw n nuts to mount the pump to bracket. In the pics you can see the offset n angle i had to adjust because of oem hose length

 

Need some ideas where to put the switches
Can someone post some pics?

 

Got a bunch of mounts in yesterday and they are all boxed up and ready to ship.



And here is a pic from @Shibbyjeep, he has the Stealth Mounts and also a set of my Fog Mounts. Super clean truck!!!!

 

Well one pair of those newly powder coated stealth brackets are coming my way and should be here Monday. Used the mod on here with the Amazon license plate bracket and got it moved up today. A Cali Raised 3D should be coming next week and a Mictuning switch mid-week as well.

One question though on the wiring. Does the Mictuning switch require a relay or can I simply wire it up to the Cali Raised wiring harness using the directions in one of the above posts?

All advice is welcomed.

 

You just wire it in place of the supplied switch. You still use the relay, you just replace the not so pretty switch with the factory looking mictuning. Real easy, there are some very good examples in the other posts.

 

^and you have to tap into an ignition source on your truck, if you wish to illuminate your Mictuning switch

 

Thanks much. I should be good to go then. I already knew about having to power the switch backlight. Not too concerned about any of the wiring part, just didn't know purchasing the relay was needed.

Thanks again!

 

More 2nd Gen Stealth mounts coming back from the powder coater tomorrow! Let me know if you have any questions.

I will also be posting pics of the aftermath from my truck theft on the mounts and @CaliRaisedLed. The truck was in a head on collision by the thieves. The LED and mounts are perfect and will go back on my truck after the repair!

 

OUCH! Sorry to hear that! The insurance company didn't total it out?

 

I will know tomorrow...

 

Going to be placing my order on your website this afternoon. How long does it usually take Cali to send out the lightbar?

And it's ordered!!!!

 

We both will ship most orders within 24 hours unless the item is on back order, in which case we will let you know. Most orders ship within a week even when on back order as both Cali and myself are constantly in production of more!

 

Just got a large amount of 2nd Gen Stealth mounts back from powder, they are ready to ship!

 

No more flush mounts??