COHBSTEQ'S basic white girl

I'd want one big one so there would be space for a flip down table/shelf

 

well.. im thinking the tire on one side of the flip out and a cargo box/gas tank holder, there will be a table on both sides, so i can have my bbq on one side of the tail gate and the single burner on the other side, and have my drawer system in the middle.

 

That sounds good too

 

That sounds badass.

 

Im hoping it will be, im ordering the one hinge and latch hopefully first of next week and see if i can get it tacked into place, ill probably have to wait a month in between hinges those suckers are spendy!

 

I am debating on going with full swing out or dual as well but leaning more towards dual. One advantage to the dual i have found is that your gas cans can swing out closer to your gas door depending on which way it swings out. Also a propane tank can be closer for cooking if your camping stove slides out of your drawer system. Only downside for me is one more step to open it and close it to get to things in the bed. I have a double door fridge at home and I have to open both doors to get anything out or see what's in the fridge same concept haha. I am in the process of drawing up a dual swing out on Sketchup and a drawer system for the bed to see how things will look. If you find a good source and reasonable price for your drawer sliders preferably locking, please share. Looking at doing something similar to this.

 

Very nice, I'm actually not using sliders, I'm using skateboard bearings! Cheap and get the job done. This is very simple and budget, I'm into it about 13 bucks, I got all the material from scraps at work.. the dual also has the possibility for dual tables! I've been toying with the idea of running a ladder on the side of my rear bumper.. Who knows

 

Good idea, I have seen those skateboard bearings with several drawer builds and they work great. Yeah, dual tables is a bonus, never enough surface area for cooking while camping. Once I get my plate rear bumper built I would like to do a side ladder as well. I am always climbing on the rear tire to reach on top of the shell.

 

Would you make your own ladder or buy something?

 

I have tried to search for one that might work but will probably have to custom built it. I want it to bolt onto some tabs on the bumper then onto the roof rack on the shell. Nothing on the market that I have found would be able to make that happen. If I had a tube bender it would be cake but I don't so may have to make it out of square tubing. Still need to save up for a welder too. The tube bender I want is 2K haha.

 

Yeah I got the same problem.. I know of a few shops. With benders that are reasonable, but I'm henna bolt mint from the bumper to the rack as well, the two tubes will just need a slight bend

 

Want a good deal on some swingout parts from Comp 4x4? I have a couple of their spindles I bought but probably wont use.

 

I'm very interested @zscott , do you know what "style" hinge they are?

 

The spindle type with the weld on dual sheer support bracket. Also have the pull pins and plates to weld on to the spindle so it locks open and closed.

 

Pm'd

 

I can't think of anywhere to put this flashlight.

 

My truck

 

One the roof rack facing backwards to switch on when people behind you refuse to turn off their brights. I always get these clowns behind me.

 

Put a colored lens on it and stick it under your truck. Then you'll have sick underglow that will send all the ladies coming

 

Haha that would cause a major accident, this things like the sun!!