Colorado B.S. Thread

Take you sway bar loose for one. From the pic it looks like it is still attached.

 

Trying to figure out if that is a piece of furniture on the right side of the picture or a pale legged ginger in wrinkly blue capri's standing on a window sill. Care to fill us in?

 

So I got it off now I'm trying to put the spring and shock back and the lower control arm won't budge I loosen the bolts and it won't fall to the ground like the other side it Springs back up in place I don't get it I guess I need a spring compressor I didn't want to half to use one but that dam control arm lower buy the way won't fall am I missing something I just did this to the other side so I thought I knew what I was doing ha ha

 

its a traffic stick. like a cone but more cylindrical.
i just wanna know when brett got a leaf

 

It might help to unbolt the spindle from the upper control arm

 

Mannequin

 

Kinda raises more questions

 

May have to zoom in on this one. I am t getting up for a closer shot.

 

Any mod days coming up? I need help bleading brakes, just had rotors turned and still have a shake when breaking over 50guess I'll be replacing front calipers...

 

Why is your camera so blurry?

 

The lower control arm uses rubber bushings that have pre load on them. Have someone step on the lower arm and keep it under pressure and then use a pry bar to slide the coilover into place.

 

He's moving super fast!

 

I am sure some of you may have done this so here it goes:

I don't want to flip my tires to keep white letters on the inside of the wheel. So has anyone taken off their white letters from the tires?

How? Any damage to the tire? Keep it real.

 

Why not just pay to have the tires flipped if you want the white on the inside? Sounds like a better solution than modifying the tires in some way which could compromise their integrity. Just my 2¢

 

That makes no sense. Turn the rotors off the car?

 

It shouldnt cost you much to flip the tires and there will be no chance of damage to the tire.

 

Yea, had the parts store turn them, could tell that 1 was warped a little, but did both anyway

 

Can't be done. The whole block is white. Just plasti dip!

 

Black Sharpie with every oil change...

 

That time you should be sleeping... But can't get to sleep. 4am is coming up soon.