Colorado B.S. Thread

That is the problem, you need to have an on car resurface done.

 

What's that usually run? Mine seem to heat up coming down passes, even though i downshift and try to avoid using the brakes. By the end if i need to brake hard, my steering shakes like a paint shaker. But it's mostly fine around town.

 

Ahh.so it's prob better to just get new rotors now? They said they were getting almost to thin. And I should put new pads on? Mine have a lot of material left though.

 

I'm not sure on the cost, they discount brake labor to compete as best as possible with Midas/BrakesPlus. I don't get too involved with cost numbers

 

New rotors can still pulsate if you are dealing with a hidden issue like a bent wheel hub. If you do get new rotors do a thorough job of cleaning the mounting surface. If they still pulsate after that you might get it diagnosed rather then throwing parts at it.

 

Ok, thanks, I'll have to take it all apart again and double check how clean it is. if it was a hub wouldn't it shake at speed without braking? I've had it down hill fast and it doesn't shake but only when braking. And it goes away under 50 mph

 

I spy another first gen booty on the right

 

that's some popular ass here in foco.

 

A bent hub might not be felt while driving depending on how bent. .003" can cause a pulsation but tires have more then that when they are brand new.

 

Welcome to my life!

 

Yuck. 7:30 is bad enough. Hah

 

I'm literally the farthest thing from a morning person and my job requires me to wake up at 3:20. It's awful.

 

I hear you bud. I hate morning and I am up at 4:45.

 

Boulder spicy sausage on deck for spaghetti sauce/ Happening right now....

 

We were hoping for something better for ya than spicy sausage. But to each his own.

 

jealous of my spicy sausage are you?

Behold! spaghetti of the gods!

 

and with that, the dog cleans the plate... i'm off to bed.

 

My question is, did you get the munchies before or after the Boulder sausage started cooking?

 

So... good advice Gramps did what you said got it in easy pezie lime squizy
It worked exactly how you explained it tks and I will be at bandimere fo sho I wanna try and see how fast I can wast gas I need to get some high octane gas before I go just a little drive out to Erie

 

I picked up STOP TECH slotted Rotors and pads for the truck on the last round. They have been great with the 315's. I am gonna get a set for the 4 runner here soon.