Raleigh North Carolina and surrounding areas

Yea it was me. I just got some Wheelers bumps delivered. I'll see how long they last.

 

gotcha hopefully I don't need to go this route for a little while either I just ran across it by accident and thought i'd share

 

TRON car at my shop

 

Woo hoo. Got my el cheapo Amazon ditch lights in the mail today. Waiting for the CBI mounts

 

Alrighty... So if someone could give me some pointers here. Just want to make sure I have it all right...
My relay came already together, but the red goes to the + on the battery, and the black goes to the - on the battery.
This might seem like a noob question, mainly cause I am a noob. But do I just unscrew the caps on the battery and put these on the posts?

 

And my next question...
I followed the manual step by step so the switch should be right. Hers a pic, say something if you see something messed up.

 

Who going to URE this weekend and camping friday ? Me and @HrBrad8 are 90%ers

 

Ill be there at the training center.

 

@Sandman614 is the master. He helped with mine, which looks similar to yours. I don't think you're going to want to use those jumpers, we didn't use the ones that came with mine.

 

Why not? What should I use?

 

Got 4 cans of plasti dip. Dipping the new rims tomorrow at work.

 

Just went direct to the switch from the relay. Had to use another wire to go from the switch to the dash, not sure the name of it. There is a fuse in there that you feed in to

 

Well got impatient and started dipping tonight. Got a nice thick layer down. Some minor bubbling but hopefully will cover up with thicker coats

 

i hate the patient game.... I'm sitting here drawing out a wire map waiting to wire up the lights tomorrow. wish i could do it now.

 

@Sandman614 what is the problem with running the wiring harness off the battery via the terminals? its 14 awg wire to a 30a blade fuse. help me understand why i shouldn't do that.
the alternative would be to run it into the fuse box right? idk how i would do that considering my harness is made to connect to the battery

 

In my experience with the derping of stuff its best to do many thin coats vs thick coats due to bubbles and runs.

 

Yeah. I've got them completely off tires so it's easier. They have some scratches and nicks from having tires on and off them a time or two and so I've noticed a lot of the runs and bubbles I'm getting are in those areas.

 

The back looks like a car again

 

Man I can't remember the last time a bought tires this small (195/50/15)

 

1 can per wheel. Not perfect but I'll live