**OHIO WHEELIN' & MEET-UP THREAD**

I just reloaded some 45, might do some 357 in a bit. Other than that, don't have any plans

 

I just got done replanting more grass in my front yard and trying to clean up around the house that way it doesn't look so white trashy lol. Anybody need a big tractor Tire for their kids??

 

Got an idea for mounting the spare tire in my bed. Going to work on that tomorrow

 

Stt pro are noisy one of my coworkers has those on his jeep

 

Any MT is going to be noisey. I'm willin to deal with it.

 

Got my spare tire hold down situation sorted out. Now to get a 33" ordered.

 

Installed my console gun safe. Is awesome

 

Looks great! Are those the tie down loops from harbor freight? Question: So for weight distribution, why wouldn't you put it back by the tailgate?

 

They are from lowes, but same thing. Put it where it's at because that's the easiest place to reach the bolts under the bed to tighten then

 

Makes sense! looks good! With my new '12 DCSB, im looking at new mod options - this will probably happen when I replace my tires next spring.

 

I have a 33" maxxis bighorn on the way. Cheapest thing I could find. 285 will hit the control arm using the factory spare so had to stay with 255

 

Looking into some skid plates for 2015. Looking to replace the chincy factory plate + get a front diff plate as well.

Open to suggestions, not looking to break the bank either.

 

Aftermarket replace both front plates. I have a pelfrey aluminum but there are a lot of nice ones

 

Pelfreybilt steel all the way down the truck.

There is actually a sale right now for when you buy all 4.

 

@Aussiek2000 I'd check your hub to fender measurments and make sure your not over that 23" Mark or your cv's are gonna eat themselves....I ran across some threads today in lue of wanting to bring my front end up more....our suspensions are identical and the only difference is 3rd gens have diff. Front springs and struts to gain 1" of lift factory. Just a heads up

 

Anyone else have a designated truck holster?

 

At ride height, my cvs are pretty level. I'll measure it though. I need to get the ECGS bushing done one of these days

 

I'm kinda wanting to do what u did...and take the 885's out and put 887's in...already have a top plate spacer in

 

Just measured. I'm at 23.25"