What Have You Done To Your 2nd Gen Tacoma Today?

Thanks for the info, if that's what you do I will take your advice on the subject. I want to do it the right way so I don't have to mess with again. Sand the whole bumper and start new. Any advice?

 

Did that

 

I've noticed Nitto's latest new tires don't come in 16s or smaller.

When I bought mine, they were listed as 57lbs on a few websites. Doesn't sounds like much, but I was taking weight into consideration when I bought them.

 

Depends on the size. My email was from cooper directly, since they don't list them on their site. All the other sites I saw with the weight were inconsistent.

 

Yea, all new Nitto tires are 17" and up (Exo, G2, Ridge). They say 16" and white letters are dead and won't invest in it unfortunately.

 

your going to have to sand the effected areas to bare metal to try and clean as much rust off as you can. depending on how bad the rust is you'll need to treat it with a rust killer/converter then if pitted put a skim of filler over that area. after you sand the filler down it should be very thin all your trying to do is fill the pitting if any. then prime and sand make sure no bare metal bleeds back through if it does prime some more. then sand over the whole bumper with 400 grt paper wet or dry doesn't make much difference wetsanding helps keep the dust down. then you'll be ready to tape and paint. if you have more questions pm me i'm happy to help

 

Made some limb risers last weekend:

 

Thanks Casper. I want to attack it soon before it gets too bad! Thanks for the advice.

 

Love this beast!!! Looking good!!!

 

Painted my front grill. Think it turned out really slick looking

 

I like that!!!!

 

Installed DEPO headlights, and started a build thread!

 

now put the grill on only takes a couple of minutes

 

where is corey in wv? i'm just in north central va

 

hey chad while you've got the grill off go ahead and order some of the oznium led bolts and do the raptor lights before you install it theres a whole thread on here with deailed instructions and it's pretty easy

 

I was thinking I really want to do something like that!!! Also going to do a small bit of black radiator paint behind there.

 

Raptor lights!, I love mine

 

just go to walmart and get a cheap can of flat black and dust it around and cover what you want but keep it thin on the radiator fins