What Have You Done To Your 2nd Gen Tacoma Today?

Yeah... kinda nasty now that I see it in the pic.

 

I thought about placing mine above the rear view mirror as well but the back buttons will be less accessible.

 

True. I thought about that, but to be honest I didn't think it would bother me that much. Especially since I don't really plan on changing the display much and if I do I can just reach around it and do what I need to do. But definitely a good point.

 

Prewired Base? My '15 wasn't. But i needed something to do that afternoon anyway.

 

Below is how I have mine mounted currently. The buttons are easier to reach but blocks part of the gauge where the important lights are. I only really zero out the average mpg on the MX.

 

That's a cool place to put it. The next thing I'll "work" on is figuring out what gauges I want on the first page, and then others possibly for a second page and ETC that I'll check depending on what/how I'm driving.

Right now I have trans temp, instant mpg, avg mpg, miles to empty, gas level and intake temp. Problem with the miles to empty and gas level is that there is no fuel sensor on my rig so I have to set the gas level manually by resetting the fuel level manually every time I fill up.

 

So educate me ... does this plug into the OBD port?

 

Indeed it does.

 

I just turned the alarms off so no beeping ever.

 

Thinking I missed out on the Group Buy

 

I'm sure there will be another.

 

Been pretty busy the last few weekends...replaced the harmonic balancer and front crankshaft seal (minor oil seeping), replaced the AC compressor and recharged (bad compressor clutch), replaced the rear propeller shaft ujoints (one was clunking), installed a double din Bluetooth stereo headunit, replaced driver's front wheel hub/bearing & cv axle seal, installed dirt king LCAs, @Mobtown Offroad tailgate skin & cap, @08yoter paracord "oh shit" handles

 

what exactly does this do that the app "Torque" and an $8 OBD adapter wont?

 

Not familiar with the other app so can't really say. Sorry.

 

Ok just curious. Its an app for Android phones that displays content from a Bluetooth OBDII adapter in many configurations. I guess if you didnt want to mount a phone or tablet, and have a dedicated device a SG or UG would be better . . .

link for those curious
https://play.google.com/store/apps/details?id=org.prowl.torquefree&hl=en
and the adapter:
http://www.ebay.com/itm/ELM327-OBD2...457021?hash=item236c0a1b3d:g:Lr0AAOSw3YNXZz6l

 

Nothing different really. Like you said, only difference is if you just want a stand alone device instead of multi tasking on a phone while driving. I don't personally like to use my phone while in my truck as anything else other than a phone/music player.

Only thing about the OBDII bluetooth adaptors is everyone of them has mixed reviews on places like Amazon because for the most part they are all cheap junk. It's just a matter of getting lucky and not having a problem with them, or that it doesn't break in 5 months. And then if you want to move up to a more expensive, quality product, you mineswell buy a dedicated gauge like an Ultra Gauge or Scan Gauge. The Ultra Gauge isn't built all that well either from what I've seen on here, which is part of how they keep costs down.

 

Painted the shifter bezel, or whatever it is called, on the center console black and installed outlets on it and behind the armrest. Not the best shot of it. Also did the 400 watt anytime mod while I was in there.

 

...and it will show trans temp in a 2nd gen? There are lots of threads talking about troubles with ScanGage and UltraGage displaying trans temp, so I have been hesitant to buy one.

 

There has been a ton of stuff flying around about that. Mine works and I have a 2014. You just have to create the gauge, and there are instructions for it, so it should work... should being the key word.

 

Okay, second question: can it be mounted using a Ram Mount system? It looks like the UltraGage swivel mounts have a ball-and-socket attachment, and I wonder what size ball it is.